Jumper Related Problems & Solutions

44 tags
Refine Tags
Search Tags:

Start a discussion

Results 1 - 30 of 44
[Solved] PSU wiring diagram for Delta Electronic model DPS-1085AB A
Summary: Please help me. I have Delta Electronic model DPS-1085AB A REV:00; COMPAC P/N: 30-56549 The rear therminals consist of 2 large female (#39 & #40); 32...

Pin settings on motherboard
Summary: NEED TO KNOW THE PIN SETTINGS AND IF THY CAN BE USED FOR ADD ONS. FOUND ONE THAT IS THREE SKIP ONE THEN ANOTHER PIN WITH A TOTAL OF FIVE. ITS IN BETWE...

[Solved] Windows 8 system date and time problem plz help
Summary: i m using win8 im getting date and time wrong even i change battery & also had clear the jumper .i have this problem since i purchase my pc ..any solu...

[Solved] Not able boot from CD disc in CD-ROM drive
Summary: There may be Jumper setting problem of the CD ROM. The six jumper pins are open. There is no blocks on the pins. I do not know how to set them. There ...

[Solved] What & where is a jumper? &Took apart laptop!!!
Summary: So my computer locked up because i forgot my HDD password. I looked around online to see if i could get some backdoor code or some way of fixing it. a...

Jumper settings ide to sata convertors
Summary: Do the jumper settings on ide drives need to be set when installing on a mother board that only has sata ports using ide to sata convertors? ...

I need to install a 5.25 fd drive in a w 98 machine
Summary: I have two FD (A and B) on my Win98SE comp. I rec. message:. Device not ready. Perhaps the BIOS parameters are incorrect, but how should they be set...

I can't startup my pc
Summary: when i startup the pc i have this message "Disk I/O error ...

Reinsert mobo jumper accidentally pulled off
Summary: I accidentially pulled off jumper from motherboard whilst removing hard drive. jumper settings presario cq5034 Pegatron Motherboard 513430-002 2 jumpe...

p4vmm2 cpu jumper 2-3 and 1-2 not work !!
Summary: p4vmm2 cpu jumper 2-3 and 1-2 it is 133mhz not work !! cpu fan is running but power led is off ....i tried to jumper in pin 1-2 and 2-3 it is 100mhz a...

compaq DC7900 desktop doesn't work
Summary: I changed jumper on motherboard while the set is on ," thinking that will clear pass word on windows , because i forget mine, you know war and long ti...

[Solved] Need jumper settings
Summary: I have a PT1227W Generic HDD/Floppy disk controller and I need jumper settins for it. I searched google but came out empty. Please help!!! EDIT: CPU i...

Freezes at windows startup and startup repair
Summary: i have win 7. i just removed my HDD and removed the jumper(which said without jumper 3gb/s and with jumper 1.5gb/s).Now my PC does not start.i tried t...

ibm aptiva m40 2168 CPU jumper settings
Summary: I am Upgrading My IBM Aptiva M40 2168 75Mhz CPU to a Cyrix MII or MIII 200/233Mhz CPU. Or an AMD 6-2 380Mhz or 1.4Ghz With Super Socket 7 CPU Adapter....

Jumper Settings for Quantum Fireball LCT15
Summary: I took the Hard disk out of my daughters circa 2000 Compac desktop and want to use a IDE Hard Drive Enclosure to read and copy the pixs and folders on...

stuarts ur reply is nice nd idnt have mbord u
Summary: stuarts ur reply is nice nd idnt have mbord userguide to know remove the jumper how i remove ...

jumper settings pm8m3-v n1996
Summary: i need to know the positions of the leads for jusb1 jusb2 jfp1 ...

I am trying to use a maxtor model 32049h2 har
Summary: ON THE BACK THERE ARE 9 SMALL PINS WITH A JUMPER ON THE THE SECOND VERTICAL ROW AND I HAD THOUGHT IT WAS THE PLACE THAT YOU SET UP MASTER/SLAVE OPTION...

add a MAXTOR model 32049H2 as a slave to my e
Summary: I have a COMPAQ Presario,XP HOME ,version 2002 with service pack 3, Intel Celeron CPU, 1400MHZ, 1.40 GHZ, 384 MB ram. I want to add a Maxtor model 32...

the bios will not recognize my ide h.d
Summary: my computer will not recognize the ide hard drive ...

my moniter wont come on it did at first
Summary: board g31 tm p21 it came on at first then just quit cleared cmos jumper right i think but still nothing ...

I forgot my pheonixBIOS setup utility passwor
Summary: I just dont know it ...

Cmos password removal on Gateway 2000
Summary: Unable to boot up computer due to lost cmos gateway password. ...

correct jumper settings for maxtor 52049H4
Summary: I have just fitted a second hd but does not show in 'my computer'.I set this hd jumper to slave. This second hd shows up in 'device manager' and its p...

What do I do with the jumpers on disc drive?
Summary: I have two disc drives, one burns CDs and DVDs and the other one just plays them. Do I put one as master and the other as slave? I'm asking 'cause one...

Quantum Fireball Jumper Settings
Summary: I have a Quantum Fireball Plus LM 30GB 3.5 series HD. Serial # GTLA:LM30A011-01-A 30.DAT. I have an older Compaq Deskpro and want to clone the HD wh...

how can i set a cd rom jumper for slave
Summary: how can i set a cd rom jumper for salve this my mail ***** for reply and also how can i be the best computer tech. ...

audio jumper settings on a p4x333-8235 board
Summary: I need to get the on board jumper settings for a VIA Technologies P4X333-8235 Motherboard. Thank You! Bartech92 ...

my harddrive has a original capacity of 80gig
Summary: but now it has changed its capacity to 32gig i've tried to format i deleted the partition back to unallocated and formated it back to healthy partitio...

Installed new cd drive and now get press f1
Summary: I have a Dell Dimension 5100 and I had a cd burner that went out and I bought and replaced it. I connected the original connections to it, and now on...

12


Ask Question