Fsb Related Problems & Solutions

29 tags
Refine Tags
Search Tags:

Start a discussion

Results 1 - 29 of 29
mb support up to 2.6ghz fsb/ht is that 5200mhz?
Summary: cpu phemon11x4 945 3ghz, motherboards is MSI 785gm-e51, mb supports up to 2,6ghz fsb/ ht 3.0 cpu has ht of 4000mhz wil thay work together ok? thanks...

replacing CPU celeron by CPU pentium
Summary: I am a beginner PC user . First I work on an old PC & get experiance & then work with a modern PC. My old PC has a shuttle MV43V v7.3 MB & a 2.4GHz ...

[Solved] Aspire M5620 Ram Compatibility issue
Summary: I have an Aspire M5620 with Intel® Core™2 Quad Processor Q6600 2.40 GHz, 1066 MHz FSB and my bios is locked and i can't underclock DDR2-800MHz lowe...

[Solved] Overclocking an E6550 (Software OC)
Summary: I Need to know my options for overclocking my E6550 Core 2 Duo @2.33 GHz (65 Conroe) on stock coolers. Using Software OC such as ClockGen since my mot...

How to overclock my C2D E7500?
Summary: Hello friend, first of all thanks for replying to my previous posts. Your suggestions and guidance helped me a lot. Now as i had purchased C2D E7500, ...

[Solved] M810L Changing Speed (FSB) in BIOS
Summary: It is unfortunate but as someone in this sight has told me, Upgrading the processor on this particular board is not going to show a super amount of sp...

[Solved] My FSB:DRAM is 4:16... is it problem???
Summary: My FSB:DRAM is 4:16... is it problem??? Data from CPU-Z is BUS speed Core=133 MHz and DRAM freq=532 MHz Channels=Dual, DC mode=Symmetric, CL-tRCD-tRP...

p4vmm2 cpu jumper 2-3 and 1-2 not work !!
Summary: p4vmm2 cpu jumper 2-3 and 1-2 it is 133mhz not work !! cpu fan is running but power led is off ....i tried to jumper in pin 1-2 and 2-3 it is 100mhz a...

wanna know what max upgrade can i do to my pc
Summary: rated fsb 399. mhz cpu 1400 mhz intel celeron m 330 DRAM FREQUENCY : 133.0 mhz fsb : dram 3:4 cas latency 2.0 clocks ras to cas delay : 3 clocks ras...

[Solved] new cpu overclock
Summary: , im currently oc e5700 @ 266 x4 fsb, multiplyer @ x13 using stock cooler, i get temps max of 62/65 degrees during gaming, is this ok temp? Is there ...

what memory is best
Summary: I have a core 2 extreme with a 1066 FSB,and I just bought an Asus P5E3 PRO MoBo with a System bus 1600/1333/1066/800 MHz.What is the best DDR3 to use....

DRAM freq is not integer multiple of FSB
Summary: Are there any implications when the DRAM frequency is not an INTEGER multiple (2x, 3x, ..) of FSB, as compared to integer multiples ? For example, a ...

What FSB does my motherboard support
Summary: Hello, I am looking to upgrade the processor in my computer. I have the MSI 661FM (MS-6540) mainboard with the SiS 661FX North Bridge. My current proc...

Which Processor/MB combo is faster?
Summary: How do I compare 2 PC's ?? These 2 HP desktops are on sale: p6777c - Athlon II X4 635 2.9 GHz, FSB up to 1333 MHz p6631p - Phenom II X4 830 2.8 GHz,...

It worked.The Un happanable Happened
Summary: I finally overclocked my Intel Pentium Dual Core on an MSI Ms - 7525(Boston) HP OEM un-overcolckable board.I overclocked with the Set FSB program.The ...

Simple OC E5200 from 2.5 to 3 on stock
Summary: Hello. My spec: MB: Asus p5ql-e Cpu: E5200 RAM: Kingston 800MHz DDR2 4GB VGA: ATI 4850 My question would be that what am I suppose to change in my b...

celeron D 330 2.6 vs celeron 430 1.8
Summary: i have a Celeron D 330 2.6 and Celeron 430 1.8 which is better I have both but don't know which is better or faster ...

How do I know what FSB my BIOS supports
Summary: How can I tell what the maximum FSB I can reach on my mobo is? I provided some info from an Everest report if that helps. Also can anyone tell me how ...

Celeron D vs Pent 4 and FSB! help
Summary: Quick question guys, Comparing a Pentium 4 and Celeron D , which is better? because I thought that the celeron D is a dual core where as p4 is single...

How do i over clock my intel E5700
Summary: I just replaced my 1.8 intel duo withe a 65 watt 3.0 duo intell 775 socket chip. I upgraded from one ghz to two ghz of memory. The question I have is ...

FSB:DRAM=3:5 good or bad plz tell me.....
Summary: For Checking the ratio of FSB:DRAM i used ........"CPUID" software and get FSB:DRAM = 3:5 rated fsb= 806.7 mhz bus speed= 201.7 mhz ---------------...

Can the FSB ratio create a bottleneck?
Summary: Simply stated: Does DDR3 1333 RAM, clocked @ native 1333 (fsb ratio = 1:1) acheive higher throughput than DDR3 1600 RAM with an overclocked fsb (fsb...

New computer, how far ca I overclock the FSB?
Summary: Okay here is my rig. AMD Phenom II x6 1055T 2.8Ghz (x14 multi by default. 16.5 on turbo) 4GB(2x2GB sticks) of DDR3 1333 PC310600 RAM GA-880GMA-UD2H G...

FSB speed jumpers for VECTRA VEI*
Summary: I have a HP vectra Vei8 computer that i have a 1.0GHZ processor to replace the P3 550, the fsb on the old processor is 100 mhz compared to 133 of the ...

overclocking and FSB:DRAM ratio
Summary: i have a pentium 4 , 3.0ghz with HT, socket 775 prescott, i OC it with my motherboard biostar P4m890-m7TE, to 3.38ghz the FSB whent from 800 to 900mhz...

5:4 or 3:2 ratio?
Summary: so a question about theoretical performance gains: if i link my FSB:RAM ratio and leave the FSB at 1333, which ratio should theoretically yield better...

CPU FSB & Socket Number
Summary: Can I upgrade from a AMD Athlon 64 X2 4000+ AM2 2.1 GHz 2000 MHz Processor to a Athlon 64 X2 Dc 5200+ AM2 2.7GHZ 1MB 65NM 65W 2000MHZ Processor? Will ...

Overclock unstable without 1:1?
Summary: The 1:1 ratio between the fsb:ram speed that is. I'll start with the specs: CPU: E6850 3.6GHZ, MOBO: gigabyte GA-P35-DS3R rev 1.0, RAM: 1066MHZ DDR2....

3.6GHz for a Q6600 any good?
Summary: Hi. I'm quite new to Overclocking and wondered if my speed was good: Q6600 2.4GHz taken to 3.6GHz. FSB 400 Multiplier x9.0 Core voltage 1.408 It seems...

1


Ask Question