XP 16-bit display trouble after HDD reformat

I dont know 2002
January 14, 2010 at 07:06:45
Specs: Windows XP, 80
i can only set display settings to 16 bit avfer i formated . how do i fix this . thanks

See More: XP 16-bit display trouble after HDD reformat

Report •


#1
January 14, 2010 at 07:27:24
Have you installed the drivers for your motherboard & graphics
card? - if not you need the driver disk that came with your
system or go to the relevant manufacturer's website(s) to
download them..

"I've always been mad, I know I've been mad, like the most of us..."


Report •

#2
January 14, 2010 at 10:30:22
my display says intel(r)82845g/glgraphics controller.can someone put me on this driver thanks. i looked in intel suport but i couldnot find it but i am sure it is there some place . thanks again

Report •

#3
January 14, 2010 at 21:43:32
'...intel(r)82845g/glgraphics controller...' is probably to do with graphics on the board's chipset.
If you do not have the original driver disk that came with your computer, and do not have the paperwork that might tell you the exact brand motherboard and graphics card (if one is present) then you would be best to open your case to read this information directly from the board(s) -- look for brand, model number, version number, and serial number -- Just type the brand name and model number and the word 'support' into Google and look for the manufacturers identifier in the address. Once on the Mfg's website look for Support/Downloads/Drivers. Repeat for graphics card if you have one, but it sounds like you are using onboard graphics.

Report •

Related Solutions

#4
January 15, 2010 at 07:21:26
here is what my print out of belar advisor is telling me
board intell corporation D845CLAD AAA84783-204
SERIAL NUMBERIMAD22504158
BUSCLOCK 100 MGH.
BOIS INTEL CORP.
LY84510A.86A.0009.PO30205021341.341.05/02/2002

DISPLAY INTEL(R)82 8245G/GL GRAPHICS CONTROLLER
TTX1956 MONOTOR


Report •


Ask Question