BLUE SCREEN Technical information Stop: 0x00000024 (0x001902

April 2, 2013 at 13:19:43
Specs: Windows XP
UNPLUGGED IT WHEN DOING THE UPDATES
Technical information
Stop: 0x00000024 (0x00190203, 0x83781788,0xc0000102,0x00000000)
i don't have a cd to boot the system

See More: BLUE SCREEN Technical information Stop: 0x00000024 (0x001902

Report •


#1
April 2, 2013 at 13:35:38
WELL DON'T DO THAT, YOU'LL BREAK THE PC

How To Ask Questions The Smart Way


Report •

#2
Report •

#3
April 2, 2013 at 13:46:21
too late... it kept buzzing! sorry!

Report •

Related Solutions

#4
April 2, 2013 at 13:48:34
thank you but it doesn't work. i think it's really broken. it doesn't start at all.is only gets to the main screen of windows xp and that's it.blue screen.

Report •

#5
April 2, 2013 at 13:57:17
You unplugged it in the middle of the update. The OS/file system is corrupt.

"it doesn't start at all.is only gets to the main screen of windows xp and that's it"

If it didn't start at all, you wouldn't see a Windows screen. The computer IS starting, Windows isn't loading (because it's corrupt). You need to reinstall Windows. You will lose all your data, hopefully you have backups.

http://www.geekswhoknow.com/article...


Report •

#6
April 2, 2013 at 14:13:01
Here's the deal, I don't know exactly the problem. Power interruptions during patching can kill important Windows files, the volume they reside (C:), and/or the HDD itself (the gray box inside your PC.) You'll have to check all three.

To do that, you'll need to get bootable media. The preferred tool is an install disk of Windows 7. You won't install Windows 7, but it does have recovery tools you'll need. Ask around and see if you can borrow it.

Once you get a copy and boot off of it, there should be an option to repair your PC. Pick that option, and open a Command Prompt. I'm going to assume Windows is both stored on and boots off of C:. You should probably poke around and check to see it is. If not, adjust the following commands as required.

At the Command Prompt, type:

chkdsk c: /r /v

Once that's done, many hours later, run this command:

sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

When that finishes up, remove the Win7 install disk, and reboot.

Also, I'm kinda worried about this "buzzing"

How To Ask Questions The Smart Way


Report •

#7
April 2, 2013 at 14:53:43
Post the brand and model of your computer.

Did it come with WinXP pre-installed from the factory?


Report •

#8
April 2, 2013 at 15:30:32
thanks a lot for your responses.I'll try everything tomorrow... it's an old computer that I haven't used for a long time, and the other night it showed it needed 67 updates,silly me to unplug it.
it's a DELL U7670 , thank you and good night!

Report •

#9
April 3, 2013 at 12:11:10
Probably won't help but quick to try:

Unplug the power and remove the battery. Hold the power off/on button in for about 20 seconds. Put it back together then cross all fingers and toes.

Always pop back and let us know the outcome - thanks


Report •


Ask Question