speed up vista that WORKS

carmine January 29, 2009 at 18:12:17
Specs: Windows Vista
1. Click Start.
2. Click All Programs.
3. Click Accessories.
4. Click Command Prompt.
5. On Command prompt type: cd.. (press Enter). Now do it again: cd.. (press Enter).
6. Now type the following commands (for each command dont forget to press Enter):


netsh interface tcp set global autotuning=disabled

netsh interface tcp set global chimney=disabled

netsh interface tcp set global rss=disabled
7. Reboot your computer for the changes to take effect.
8. If you want to revert everything type the following commands:


netsh interface tcp set global autotuning=enabled

netsh interface tcp set global chimney=enabled

netsh interface tcp set global rss=enabled
9. As usual reboot your system for the changes to take effect.


See More: speed up vista that WORKS

Report •


#1
January 30, 2009 at 07:40:29
You didn't mention that you have to run cmd as administrator, not an account with admin rights. Secondly, if you want to get to the root directory,
cd \ will do it in place of running cd .. twice.

A post from another forum says:

DO NOT DISABLE AUTOTUNING IN VISTA!!!
koz it rejects tweaking all life-meaning tweaks, like MTU auto discovery etc.
Check this out - turn off autotuning, reboot, change some parameter like MTU, RWIN, remember it, then reboot and go to the registry..
You can see that all parameters you've changed before rebooting are reverted to the default state !!!!!!
I got ADSL Unlimited 340k and all is working fine without disabling autotuning


Report •

#2
January 30, 2009 at 07:48:28
The command - netsh - is associated with TCP/IP network protocol and as such the only speed up it will do is the sluggish internet connection. Curious, did you copied the above steps from HERE?

i_Xp/VistaUser


Report •

#3
January 30, 2009 at 15:59:49
.... kinda unsubstantiated aint it.

some other bloke...


Report •

Related Solutions


Ask Question