|... try hooking up the monitor again and try to enter your bios |
... tap either "F1" key OR/
(1) Turn on computer by Holding down power button while pressing the ESC key.
The machine will beep, then display:
Check System, then press [F1] key.
(2) Release ESC key
(3) Press F1 key
... does the monitor come "on" @ all?
... if so you may have to still enable a setting in the bios
... my experience with Toshiba bios's is there ai'nt enough settings ...
... perhaps try tapping "F8" key @ boot-up selecting "safe mode" (with vga(?)
...or enable low resolution video
... try NOT to cuff your brother too hard!
... Posting is provided "AS IS" with no warranties