Solved D Link RTL8139 A/B/C Based Fast Ethernet Adapter

THX 1138 May 18, 2012 at 14:21:13

Are you asking for the driver?

yes i am looking for the driver

Jolicloud May 18, 2012 at 21:01:18

✔ Best Answer

Realtek only offer a W98 and later driver: http://www.realtek.com.tw/downloads... Googling is quicker than waiting for an answer....

riider May 19, 2012 at 06:52:58

The Win98 driver might work but why not upgrade to Win98SE to be sure? It will run just fine on your Celery 400 w/287MB RAM. Just rename win.com to win.old, then do an "over-the-top" install.

larryf215 May 19, 2012 at 06:54:16

if you need that to work and you can't with the os you have, change the os. If your machine can boot a cd than you have lots of options. http://distrowatch.com/?newsid=07235 larry

sdfox 7 May 20, 2012 at 19:04:12

I did a Google search for "rtl8139 windows 95" which brought me to http://www.google.com/search?q=rtl8... which brought me to the third link http://www.bluestarinc.com/techsupp... after reading the files description delete the "readme.txt" at the very end of the address bar (do not delete the whole address!!!), then press enter and after scrolling you'll see the win95osr folder and win95a folder (depends what version you're running) Here's OSR2 http://www.bluestarinc.com/techsupp... and here's 95a http://www.bluestarinc.com/techsupp... Clicking on these files won't work!!! You have to right-click on them, then go to "Save As..." or "Save Target...", depending on the browser you are using. The best way to do this is save both these files to floppy disk. Then go into Device Manager on Windows 95, right-click on the yellow question mark for "PCI Ethernet Controller" and "Update Driver". When Win95 prmpts you for the files, simply type "A:" and let it read the files off the floppy. You'll also probably need to have your Win95 CD/floppies handy, you usually do any time you make network-based changes. http://sdfox7.com