Solved how to repair the Amd64\CNBJ2530.DPB SFC error?

November 15, 2015 at 12:59:15
Specs: Windows 8, AMD E2-1800 APU 1.70 GHz / 4GB ram
i tried to sfc /scannow and it showed that it cannot repair the Amd64\CNBJ2530.DPB, after that i tried SFCFix, which generates a report after the program ends, on the report it said (FIXED: Performed DISM repair on file Amd64\CNBJ2530.DPB of version 6.2.9200.16430.) , then i tried running sfc /scannow again and it showed the same error - if u ask me why i need it, i say i had to upgrade my windows and because i encountered many errors/codes, i ended up on this sfc /scannow.

See More: how to repair the Amd64\CNBJ2530.DPB SFC error?

Report •

✔ Best Answer
November 16, 2015 at 20:22:39
There doesn't seem to be a specific fix--at least that anyone has foiund--just suggestions. I would add that sometimes bad ram causes file corruption. You might run something like memtest:

http://www.memtest86.com/

and see if it finds any problems.

Also run CHKDSK and see if any problems show with the hard drive.

Other than that try to download and install as few updates at one time as you possibly can. And try temporarily disabling as much software running in the backgroiund as possible, especially AV software



#1
November 15, 2015 at 14:09:09
Found these with a Google search: https://discuss.howtogeek.com/t/ran...

http://answers.microsoft.com/en-us/...

message edited by Jennifer SUMN


Report •

#2
November 15, 2015 at 19:35:02
So what you're saying is you were encountering some errors--of which you don't go into detail--and decided the solution was running SFC. I know with earlier versions of windows, SFC was not all that reliable. I don't know how good it is on windows 8. It might be better to post some details on the error messages or other problems you're having while running windows normally.

Report •

#3
November 16, 2015 at 08:04:44
exampe - i try to install the windows update "Security Update for Windows 8 for x64-based Systems (KB3067505)" which when the instillation ends, it shows "Error(s) found: Code 8024200D - windows updates run into a problem" (this isnt the only1 that have the same error, i need to install 93 updates and like half of them have this error and the other half have Code:8007371C, which i havent search yet) - which led me to thoses sites: http://answers.microsoft.com/en-us/... and http://www.euask.com/topic/11-Windo... -> https://support.microsoft.com/en-us... which is the dism thingie (i have get a cbs.log file from that, which is 22mb and i dont know how i can attach thoses here), after running "dism /online /cleanup-image /restorehealth" (version 6.2.9200.16384) on cmd as admin it shows "The restore operation failed. Either the repair source was not found or the component store cannot be repaired.
Error: 0x800f081f" - after that i looked around and found this <a http://www.eightforums.com/performa... -> https://support.microsoft.com/en-us... which is the sfc /scannow, i run it and it says "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log %WinDir%\Logs\CBS\CBS.log." and the forum says to manually download the files from microsoft (i tried to but idk where and how, so i skiped it) then i looked around some more and found SFCFix.exe, i runned, it generated a report which says "AutoAnalysis::
FIXED: Performed DISM repair on file Amd64\CNBJ2530.DPB of version 6.3.9600.16384." , after that i run sfc /scannow again to confirm it and it says it is still corrupted, and here is where i am stuck
--------on the sfcdetails.txt everything is fine except this "2015-11-15 20:19:24, Info CSI 000007da [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.2.9200.16430, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch" the line below it have exacly the same text except that the "000007da" is "000007dc" and after that it says "This component was referenced by [l:164{82}]"Package_86_for_KB2769165~31bf3856ad364e35~amd64~~6.2.1.0.2769165-12166_neutral_GDR"

message edited by Xaralabos13


Report •

Related Solutions

#4
November 16, 2015 at 10:48:21
Jennifer SUMN already tried thoses, still same error

message edited by Xaralabos13


Report •

#5
November 16, 2015 at 20:22:39
✔ Best Answer
There doesn't seem to be a specific fix--at least that anyone has foiund--just suggestions. I would add that sometimes bad ram causes file corruption. You might run something like memtest:

http://www.memtest86.com/

and see if it finds any problems.

Also run CHKDSK and see if any problems show with the hard drive.

Other than that try to download and install as few updates at one time as you possibly can. And try temporarily disabling as much software running in the backgroiund as possible, especially AV software


Report •

#6
November 17, 2015 at 09:51:32
If the RAM test finds a problem, before ditching the RAM clean its edge connectors with a soft pencil eraser and pop it in and out a few times to clear oxide off the sockets.

Always pop back and let us know the outcome - thanks


Report •

#7
November 17, 2015 at 14:58:57
did that, i downloaded the updates from "control panel" windows updates, i managed to install then (tnk god, right?) said, rertart pc, i did, then it started installig them... it took it exacly 12 hours (omg) then it started "configuring windows updates" -> "failure configuring windows updates, reverting changes" ..... i almost broke my pc then.... at least u solved my problem

Report •

#8
November 17, 2015 at 18:31:12
Well I don't know. It doesn't seem like much of a fix. I still think installing so many at once may be the problem. There may be one that's buggy, at least for your particular setup.

Report •

Ask Question