I can only start my laptop in safe modes or else i get the blue screens I have a pavilion G60-443cl here are the following codes i get
BCCode: 1000008e
BCP1: c0000005
bcp2: 8316B487
bcp3: AE1FF754
bcp4: 00000000Im running a windows 7 ultimate 32 bit
The most likely cause (especially on Win7) is having one or more incompatible or malfunctioning third-party device drivers installed. It's a trial-and-error process using Safe Mode. Uninstall one third-party driver at a time and restart. Keep doing that until Windows starts normally without BSOD. The last driver you uninstalled will be the one that caused the problem, so re-install all drivers except that one.
For the device that is now missing it's driver (because you haven't re-installed it) you may be able to get a newer driver from that device manufacturer's website.
I don't think that is the issue because i just re installed the OS and nothing else and I was still having the issue then i thought maybe beacuse the HP drivers where not installed that i was having issue so i went to HP support website and installed the proper drivers for the chip set and other drives.
and did installing the drivers work ? computers are a second home
NVIDIA GeForce
GS_Toxict51
no the laptop bluescreens about 1 min after it windows loads with the same error codes as above. but safe mode still works fine
do u have any windows 7 bootable disk ? any repair disk ?
if so perform a repair installation of the OS and reinstall everysingle drive.
the pc is booting into safe mode.
in safe mode some drivers are not running one of which the graphics driver. so do a repair install and reinstall all of ur driverscomputers are a second home
NVIDIA GeForce
GS_Toxict51
Yes (14) | ![]() | |
No (14) | ![]() | |
I don't know (15) | ![]() |