Motherboard Drivers

January 1, 2010 at 06:51:14
Specs: 7, 2.5 gb ddr2
I using Windows XP last time.
I upgrade to Windows 7 now.
I put motherboard driver installtion disc but fail
to install. It is the drivers does not support
windows 7?

I using Intel dp965LT, any suggestion to
download motherboard drivers for windows 7?

Thanks


See More: Motherboard Drivers

Report •

#1
January 1, 2010 at 07:20:57

Report •

#2
January 1, 2010 at 14:43:57
Try the motherboard manufacturer site. I have the same issue with an Asus board. My probelm was that withought the lan drivers I could not connect and those drivers were on the cd that win 7 said was not digitaly signed then said this software is not for this OS. I finally used another computer to go to the Asus site and download the drivers to a usb stick. Tada all is well.

Likely


I want to go like my grandfather did. Peacefully in his sleep. Not screaming at the top of my lungs like the passengers in his car.

(\__/)
(='.'=)
(")_(")


Report •

#3
January 1, 2010 at 18:18:42
You can also update your Intel drivers using the Intel Driver Update Utility, here: http://downloadcenter.intel.com/def...

Report •

Related Solutions

#4
January 2, 2010 at 00:26:44
Your M/B drivers disk should be old ( from Win XP times ) and does not support Win 7.

You should visit M/B maker's web site and download drivers, if available, from there.

Most probably, Win 7 should already have the drivers in the disk. You may not need any drivers. Maybe BIOS update could be good.

Regards

SuatCINI


Report •

#5
January 2, 2010 at 00:39:16
From the intel download website,
my motherboard intel DP965LT , i choose windows 7 32 bit, just
have a driver to download. None bios update or anything else.
That driver not included LAN and the others. So i cant connect to
internet at windows 7.

Any suggestion?


Report •

#6
January 2, 2010 at 00:52:05
Well Intel have stated here that they are not supporting Windows 7 on that board:
http://downloadcenter.intel.com/Det...

But here's the latest Chipset update (Windows 7 32Bit) for that board anyway:
http://downloadcenter.intel.com/dow...


I haven't searched massively for any Windows 7 driver that may be available for your network card
Sometimes its easier just to purchase a new PCI Network card that works with Windows 7


Report •

#7
January 5, 2010 at 05:05:34
how about other drivers on the motherboard
such like sound and the others
any way to solve this problem?

Report •

#8
January 5, 2010 at 06:25:48
Have you already installed 7 and found all that hardware not working?

Report •

#9
January 5, 2010 at 22:16:12
ya, got sound but the sound got problem, like can hear 50%
only, Lan cannot use at all....

Report •

#10
January 5, 2010 at 22:21:25
You obviously cannot run Windows 7 properly with that Motherboard

Either update the Motherboard (ie replace for a newer one)
Or revert back to XP

Is that the best answer?


Report •

#11
January 6, 2010 at 03:30:20
Speed

Use the link in response #1 and here. All the necessary drivers are located there.

http://downloadcenter.intel.com/Sea...


Report •

#12
January 6, 2010 at 03:43:11
Use the link in response #1 and here. All the necessary drivers are located there.

?

I have already supplied the single only Intel driver for Windows 7

@OtheHill Where are all the drivers again?
And please read my Response Number 6 as well
So did you want to +1 me, since I have correctly answered?
I do note that your answer is WRONG


@Speed, are you downgrading to XP then? (Assuming that you are keeping the non compatible Windows 7 board, of course)


Report •

#13
January 6, 2010 at 03:55:49
kimsland

There are Vista 32 drivers available at that link. They should work fine. As you well know just because Intel is no longer supporting that board doesn't mean the drivers won't work.

Don't you think the prudent thing to do would be to have the OP try the Vista 32 drivers first before advising them to buy a new board. IF the Vista 32 drivers don't work, which I doubt, then we can deal with it.

So, no, I am not going to give you a plus for those answers.

As I told you in another post we are a family here. If you insist on playing one upsmanship I doubt you will be accepted as one of the family.


Report •

#14
January 6, 2010 at 04:08:34
I always help the OP
I have stated quite clearly I don't support support members

The Vista drivers will not work
Even Intel themselves have stated this (I quoted them above)

I don't expect to receive "-1" responses on correct support
I am not trying to be arrogant, I work on about 10 computers a day (sometimes 100s (as with networks)) for at least since DOS 5.1 was released


Report •

#15
January 6, 2010 at 04:40:04
You last reply does show arrogance. There is more than one way to disagree with a differing opinion. Stating "I am right, ergo, you are wrong is childish. That behavior will not make you any friends here. I already see some backlash.

While we are on this subject can you state why you are not staying at your old home where you have over 18,000 posts, as you so aptly bragged?

This issue is about respect. You are the new kid on the block here. Some members here have been around for a decade or more. That should earn them some respect. If you don't understand that then I don't know what to say.

"I work on about 10 computers a day (sometimes 100s (as with networks)) for at least since DOS 5.1 was released"

Where do you find the time to respond to 20 posts a day here?

See #4 below.
http://www.computing.net/answers/th...


Report •

#16
January 6, 2010 at 05:07:09
While we are on this subject can you state why you are not staying at your old home where you have over 18,000 posts, as you so aptly bragged?

I was Moderator for 2 years, and had the highest forum post count
(by the way, I'm just stating facts to help in my answer, I'll continue..)
Anyway, there was a change in the forum that I could not accept, on informing members best support practices
Staff wanted to post programs that needed to be purchased, as support replies
I stated that the OP did not need to purchase any program, and I basically ridiculed the response (note I also supplied free (proper) support)

I was informed by our Admin (through private discussion forum, which all forums have) That staff were allowed to post such support, to help the member, and the support also helped the site (royalties I suppose?)

I stated that you can say what you like on the front page (off the forum) but on the forum its best to actually help the OP only NOT the site.

I was then told that a Moderator (me) should accept the entire site, not just the forum.
I said I cannot do that, as that is not helping the OP on the forum
Immediately, my Moderator abilities were removed
Plus all my guides I posted are now all jumbled up (a side effect for a standard Member without higher posting abilities

I replied back on Private discussion, and stated I quit.


Report •

#17
January 6, 2010 at 05:19:02
OK, that seems to be a valid reason for leaving.

Never the less, you are coming off as abrasive when you state you don't care about the other helpers here.

No one person knows everything. So, every regular helper here has some knowledge to impart. To belittle that fact is arrogant.

If you feel that way perhaps you should start your own help forum.

I try to treat others here with respect and expect it in return. We don't always agree and i would be the first to say my responses are not always right. That is not the issue.

You appear to be looking for a new home where you can help less experienced computer users. That does not make you unique. All the regulars here feel the same way.

Sometimes we even help each other.


Report •

#18
January 6, 2010 at 05:34:22
You're right.


I may also still be a tad upset over all this (on the other forum)
I agree...

I will take a break from Computing.net, as I feel my replies may be an issue at the moment (that I had not seen until now)


Thank-you for your understanding

Note: The only reason I don't start my own forum is because I feel it will take too long to build memberships up
(ie I just couldn't reply to one post a day)

I will not post on any other forum for a few months
Maybe my time is up. All forums have changed from years ago. (I started at BBS support forums on dial up, many years ago)
I don't fit in any longer


Report •

#19
January 6, 2010 at 05:53:02
kimsland

Weather you go or stay is up to you. Certainly not me. I would say that perhaps you do need a break. You are right about forums changing. This forum was bought by Tom's hardware not too long ago. Some members did not like some of the changes that have happened. Most of us are adjusting and understand that we need to accept change. If it can't be accepted then moving on is the best thing to do and many good members here did just that.

Now back to you. You appear to have much knowledge. I suggest you simply try to temper your enthusiasm a little and you will fit in. At any rate Justin Weber is the webmaster here and he is the only person that can ask or make you leave. I hope I haven't given the impression that I am trying to force you away.

Just practice the golden rule and be patient with posters that don't know better. You need to place yourself in their shoes. I almost always leave some wiggle room in my responses. Like, I think, or You MAY. That way the OP has the option to decide what to do on their own. If the OP seems unsure and another responder has given good advice you can simple state that you agree with ? and leave it at that.

Sounds like you won't be able to stay away from help forums for long, even if you try. IMHO CN is one of the premier help forums out there. I feel that is because CN attracts competent helpers.

I am rambling so I will stop. Good luck whatever you decide to do but you are welcome here, at least by me, just try to think about what I have previously stated.


Report •

#20
January 12, 2010 at 02:08:24
Pls open a separate thread if you need help with an issue.

edited by moderator: Thread Hijack


Report •

#21
January 12, 2010 at 05:06:59
Inforum

Please use spacing between sentences. You post is extremely hard to read as is.

Not sure what to make of your response above.


Report •

Ask Question