Solved Blue screen problem, every day

November 7, 2012 at 00:26:27
Specs: Windows 7, amd x3 2.9 athlon II, 4 Gb ram
ntkrnlpa.exe ntkrnlpa.exe+40ae8 0x83255000 0x83668000 0x00413000 0x503f7f43 30.8.2012. 15:57:07 Microsoft® Windows® Operating System NT Kernel & System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) C:\Windows\system32\ntkrnlpa.exe


morning when I start the computer, Windows crashes. Yesterday and the day before yesterday just after 5 - 7 times ignition were raised. During the day, this problem does not occur. Today, as soon as they stood up, they crashed Widows and appeared blue screen. With the above mentioned message.

AMD Athlon II, 4 GB ram, ATI radeon HD 5770 1 Gb, asus MAN78 SE Win 7 ultimate 32 bit


See More: Blue screen problem, every day

Report •

✔ Best Answer
November 10, 2012 at 09:04:20
We should have one more look at the possibility of this being a RAM issue.

First take out the RAM modules and clean their edge connectors with a pencil eraser. Insert and remove each module several times in order to clean any oxide off the sockets themselves.

See if this helps.

If not try the computer with one module at a time, and run the RAM test on each one.

I appreciate that you have already tested the RAM but I am wondering if there is either an intermittent fault or a RAM compatibility issue.

If none of this helps then I think you need hands-on help - sometimes trying to fix this sort of problem with help from afar doesn't work out.

Always pop back and let us know the outcome - thanks



#1
November 7, 2012 at 04:28:55
Hi,

Try booting your system in Safe Mode and then try restoring your system back to a date when it was working fine. System Restore will affect Windows system files, programs, and registry settings only.

For System Restore steps, you can refer to the URL mentioned: http://windows.microsoft.com/en-US/...

If the issue still persists, you can even refer to the URL: http://windows.microsoft.com/en-US/...

Keep us posted.

Thanks & Regards
Debbie B
#iworkfordell


Report •

#2
November 7, 2012 at 05:05:09
Please post the blue screen STOP: code & error message. See below:

http://www.windowserrorhelps.com/wp...

And disable the auto-restart feature:

http://pcsupport.about.com/od/windo...


Report •

#3
November 7, 2012 at 14:52:35
Could also be worth running a RAM test too:
http://windows.microsoft.com/en-GB/...

Always pop back and let us know the outcome - thanks


Report •

Related Solutions

#4
November 8, 2012 at 01:35:53

Today morning I turned on the computer and after 2 minutes, Windows crashed, montor without images (blescreen does not show up), after turning off the computer via the main switch (because it could not be otherwise), and after 5-6 attempts ignition windows are raised, but then bluescreen appears. The blue screen view today's report does break down, but some of the prior day. I tested the memory as you said, does not have any errors. When kopmjuter running, working without further problems and bluesceen. Not only that I try to reinstall Windows, and then I see that right will be any problems. I used the new ATI graphics drivers a few days ago and then began to appear in these problems.

This is me Driv3rCRO, even though I was logged not let me post, so I went through Facebook.

Here are pictures from the bluescreen view

http://www.zaslike.com/files/w12ixl...
http://www.zaslike.com/files/rwgi2m...


Report •

#5
November 8, 2012 at 01:39:16
error, so I deleted the post.

Report •

#6
November 8, 2012 at 23:33:23
Here today came again when starting the computer bluescreen. Should occur as soon as the initial screen, Windows has crashed and blue screen. Here's what the message was:

IRQL_NOT_LESS_OR_EQUAL

STOP 0x0000000A (0x00000014, 0x00000002, 0x00000000, 0x832EC590)


Report •

#7
November 9, 2012 at 07:01:19
It seems from your #4 that you have a problem with the new ATI graphics drivers.
Did you try System Restore as suggested in the first response?

Report •

#8
November 9, 2012 at 10:53:33
no date which would take me back before the occurrence of these problems.

Report •

#9
November 9, 2012 at 14:23:17
You could try this:
http://windows.microsoft.com/en-GB/...

Always pop back and let us know the outcome - thanks


Report •

#10
November 10, 2012 at 07:45:15
Did not help, I have to wear it to the service looks like. Only try to reinstall Windows, but I'm afraid it's not the graphics, or power.

Report •

#11
November 10, 2012 at 09:04:20
✔ Best Answer
We should have one more look at the possibility of this being a RAM issue.

First take out the RAM modules and clean their edge connectors with a pencil eraser. Insert and remove each module several times in order to clean any oxide off the sockets themselves.

See if this helps.

If not try the computer with one module at a time, and run the RAM test on each one.

I appreciate that you have already tested the RAM but I am wondering if there is either an intermittent fault or a RAM compatibility issue.

If none of this helps then I think you need hands-on help - sometimes trying to fix this sort of problem with help from afar doesn't work out.

Always pop back and let us know the outcome - thanks


Report •

#12
November 12, 2012 at 02:01:14
perhaps the memory, because this morning after the fall of Windows, (bluescreen) could no longer light up, and when I pulled out of the memory modules and put one module, they first chili strange noises, and when I pulled the module and placed second, computer is turned on. But do not guess I'll wear it for repairs and let the dealer find out what it is.

Report •

#13
November 13, 2012 at 00:02:39
Here are today without the memory module, the computer turned on without crashing, but just in case I'll take it to review it, and to purify it. Thanks for your help.

Report •

#14
November 13, 2012 at 08:59:52
Good news. When you feel really certain that this issue is fixed perhaps you could select a "Best Answer" which will mean this thread is marked as Solved.

Always pop back and let us know the outcome - thanks


Report •

Ask Question