Asus G73SW BSOD after windows installation

Asus G73sw-a1 notebook (2ghz intel core...
July 1, 2013 at 17:44:41
Specs: Windows 7, i7/ 8GB
I have an Asus G73sw laptop with some BSOD problems after a fresh installation of windows. The BCC's are listed as follows 7E, 0, C4, 24, 124, A, 109, 24, D1, 7F, F4, and 50. I have yet to have any crash while in safe mode. The hdd has passed Seatools HDD test long and short as well as 14 rounds of memtest. CHKDSK finds no errors. Sometimes I'll have the PC lock up and show no activity on the HDD LED.

See More: Asus G73SW BSOD after windows installation

Report •

July 1, 2013 at 18:28:47
"I have yet to have any crash while in safe mode"
Which points to a driver problem.

Copy & paste the dump (.dmp ) file onto your desktop & then upload it to a site of your choosing or use Image Uploader. Post the link please.
Minidump file is located in C:\Windows\Minidump
Kernel memory dump is located in C:\Windows\MEMORY.DMP
Startup and Recovery Settings
If the folders are empty > Right click on My Computer and select Properties.
Then select Advanced system settings Tab on the left menu.
Under the Startup and Recovery section, click on Settings.
Make sure "Write an event to the system log" is checked and "Automatically Restart" is unchecked. In the drop down menu under "Write Debugging Information," select Small memory dump (64KB or 128 KB) press OK and OK again.
Now next time the comp has a problem, get the EXACT error message off the screen & see if there is a .dmp file in the Minidump folder.
If it is still empty, repeat the process, but change > Small memory dump to > Kernel memory dump.
How to Enable Kernel Memory Dumps
To have Windows Create a Small memory dump (Minidump) File on BSOD
A) Copy and paste the command below into the elevated command prompt, and press Enter. (see screenshot below step 7)
wmic RECOVEROS set DebugInfoType = 3
Close the elevated command prompt.
Restart the computer to apply.
Overview of memory dump file options for Windows 2000, Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2.
If a .dmp file is produced, upload it to a site of your choice, or use Image Uploader. Give us the link.
Image Uploader
How to use

Report •

July 1, 2013 at 18:30:35
Another way is to use the process of elimination.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Perform a clean startup to determine whether background programs are interfering with your game or program
Run Selective Startup using System Configuration
Using Msconfig to troubleshoot conflicts in Windows Vista and Windows 7
The Benefits of Windows Diagnostic Startup Mode
Using System Configuration

Report •
Related Solutions

Ask Question