Acer Windows 7 System Restoration hangs on disk 2

November 16, 2014 at 07:37:25
Specs: Windows 7
installed new hard drive and received the recovery disk from Acer I start it and it runs through the system disk ask for recovery I that one runs all the way then it ask for disk two I put it in and it runs to 61% then stops

See More: Acer Windows 7 System Restoration hangs on disk 2

Report •

November 16, 2014 at 20:19:26
See if disk needs cleaning.
Test system memory by booting to a CD with Memtest86 on it. Run through all tests. No errors are acceptable with RAM.
Contact Acer to possibly replace faulty disk.

You have to be a little bit crazy to keep you from going insane.

Report •

November 17, 2014 at 11:42:00
If the old hard drive is still working and you can go to All Programs and create the 3 Factory Reset Disc this would be better to install on the new hard drive. It has the CD Key and correct Serial Number. Serial Number on a working computer can be found if worn off . Command Prompt -- type -- wmic bios get serialnumber -- press the enter key. No space when typing serialnumber.

Report •
Related Solutions

Ask Question