Uninstall RRAS on win2003 64bit/Internet Prob

August 18, 2011 at 19:42:02
Specs: Windows 7
I have googled this and gotten 10k answer....so i came here where i seem to get a variety of good answers and recently I have found to get the right answer. So here it goes....

Win 2003k 64bit server has ras on it I am not using the ras anymore but it seems to be tied to the internet settings...i have 30 users...and some have problems getting onto the internet I usually restart the ras but lately i am thinking i will do away with it all to gether but cant...... I didnt install it and dont know how to unbind it from the internet settings ??? How do i uninstall ras and keep my users on the network and on the internet....

Thanks in advance

Here and Ipconfig from the server with some things i blocked for security reasons

Here is the IP config all again from the server

C) Copyright 1985-2003 Microsoft Corp.

C:\WINDOWS>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : cd...
Primary Dns Suffix . . . . . . . : C.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : C.local

Ethernet adapter Lan .25:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
Physical Address. . . . . . . . . : 00-10-18-60-2A-2A
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.25.20
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.25.20
DNS Servers . . . . . . . . . . . : 127.0.0.1
69.6.190.10
Primary WINS Server . . . . . . . : 192.168.2.200

Ethernet adapter Wan .2 :

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #3
Physical Address. . . . . . . . . : 00-10-18-60-2A-52
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.2.20
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1
DNS Servers . . . . . . . . . . . : 127.0.0.1
69.6.190.11
Primary WINS Server . . . . . . . : 192.168.2.200


Please help....

Thanks in advance
eHUNT


See More: Uninstall RRAS on win2003 64bit/Internet Prob

Report •

#1
August 19, 2011 at 09:04:50
I believe I have given you these steps before but here goes.

configure the dhcp server to give the workstations the following;
ip address in the x.x.25.x range
subnet 255.255.255.0
gateway 192.168.25.1
dns 192.168.25.20

uninstall the ras role
disable nic wan.2

remove the invalid wins entry of 192.168.2.200
install the wins role on the server
set dhcp to give wins at 192.168.25.20

last but not least google how to change the node type from unknown to hybrid. Its a registry edit.

Your'e done.

Answers are only as good as the information you provide.
How to properly post a question:
Sorry no tech support via PM's


Report •

#2
August 23, 2011 at 08:03:30
ehunt why are you spamming forums?
You reposted this post again here. Why?

Is there something you don't like about the answers you have received?
What are you unclear about?

Answers are only as good as the information you provide.
How to properly post a question:
Sorry no tech support via PM's


Report •

#3
August 23, 2011 at 16:50:56
sorry wanderer knowledge is power...and has my dr. friend always says get a second opinon. No thing personal....

ehunt


Report •

Related Solutions

#4
August 26, 2011 at 09:30:13
Go to the techguy forums then. I don't do support there.

Answers are only as good as the information you provide.
How to properly post a question:
Sorry no tech support via PM's


Report •

#5
August 27, 2011 at 08:11:38
Are you kidding wanderer.....I may have gotten a second opinion...but i used your advice in the end....so I am staying

thanks again...


Report •

#6
August 28, 2011 at 15:26:47
I was only providing another location where you would certainly not run into me answering your question. :-) Just trying to be helpful as usual.

Sounds like it worked out for you. Glad to hear it.

Answers are only as good as the information you provide.
How to properly post a question:
Sorry no tech support via PM's


Report •

Ask Question