help me!. my Samsung S19A100N monitors not recognized by W10

January 31, 2020 at 02:23:49
Specs: Windows 10
Hi. migrate my laptop Lenovo with W 7 to W10, now my monitors (2) that worked perfectly with W7 are not recognized (Samsung S19A100N), i TRIED WITH SAMSUNG BUT SAYS IS MICROSOFT PROBLEM.

In several sites tried downloading drivers but is not working...any suggestion? Thanks


See More: help me!. my Samsung S19A100N monitors not recognized by W10

Reply ↓  Report •

#1
January 31, 2020 at 03:55:30
Sounds to me like

compatablity settings.wait on someone else to varify not sure or i don't remember how to

Davidw


Reply ↓  Report •

#2
January 31, 2020 at 06:11:17
Monitors shouldn't need drivers.

Are you sure that you are not trying to use a resolution that the monitor doesn't support?


Reply ↓  Report •

#3
January 31, 2020 at 06:13:57
Monitors don't need special drivers. The problem is with the display settings. From what I could find, the S19A100N is an older low end 720p monitor with VGA only. It shouldn't be hard to configure as long as you've connected it properly & aren't using adapters. Just right click on the desktop screen & select Display Settings, then scroll down to Multiple Displays.

Reply ↓  Report •

Related Solutions

#4
January 31, 2020 at 07:01:58
Windows give me no option just 1366x768, can´t change it

Reply ↓  Report •

#5
January 31, 2020 at 07:07:14
My monitors are a basic "dumb" model with no bells and jingles, problem is that W 10 settings don´t even recognize them

Reply ↓  Report •

#6
January 31, 2020 at 07:33:28
See if this link is any help

https://geekermag.com/change-window...


Reply ↓  Report •

#7
January 31, 2020 at 08:23:19
Post the model number of your laptop. There should be a key combination to enable the external monitor. Try Fn+F7

BTW, checking the specs, 1366x768 is correct for a S19A100N.
https://www.cnet.com/products/samsu...

message edited by riider


Reply ↓  Report •

#8
January 31, 2020 at 08:58:05
Thanks, but is the same settings page where I struck, my problem is with the monitors not being recognized, so if they don´t exists ...

Reply ↓  Report •

#9
January 31, 2020 at 09:00:46
No, is the same settings landing ...thanks anyway.

Reply ↓  Report •

#10
January 31, 2020 at 09:50:59
I think riider may have hit on the problem/solution; in that you need to activate external monitors option on your laptop?may

Exact make/model number would be useful- so as to confirm the correct keys to use to make that option work.


Reply ↓  Report •

#11
January 31, 2020 at 10:14:40
I may have supplied the wrong key combo, that's why knowing the laptop model is important.
Try this: https://support.lenovo.com/us/en/so...

Reply ↓  Report •

#12
March 17, 2020 at 03:37:47
Usually you can choose the frequency as well
50Hz, 60Hz, etc.

message edited by Looge


Reply ↓  Report •

#13
March 17, 2020 at 20:50:52
This post is from January and the OP has not been back.

You have to be a little bit crazy to keep you from going insane.


Reply ↓  Report •

Ask Question