Solved BIOS dont show up when pressing button!

November 19, 2017 at 07:52:39
Specs: Windows 10 Home 64 Bit, AMD FX-4300 Quad-Core / 8GB DDR3
Hey guys, i have a problem. Im trying to run a virtual machine and so i have to enable Virtualization in the BIOS. My Problem is that when im starting my PC and pressing the button that is mentioned in the manual of the Mainboard for starting BIOS <del>, nothing happens. Windows just starts up normally without giving me access to the BIOS. Can someone help me?

See More: BIOS dont show up when pressing button!

Reply ↓  Report •

✔ Best Answer
November 20, 2017 at 08:53:16
Okay guys, i reset BIOS one more time and managed to set it to default, so i was able to enable virtulization. But still, thanks for your answers :)


#1
November 19, 2017 at 09:22:00
Have you tried other keys? F1, F2, Esc? On bootup, you may see a message on which key to press to Enter Setup.

Doing the best I can here... And remember, there's always more than one path to success. :)


Reply ↓  Report •

#2
November 19, 2017 at 09:47:08
@Jennifer SUMN jup it told me to press <del> for the BIOS setup but it didnt work

Reply ↓  Report •

#3
November 19, 2017 at 20:55:22
Sometimes just pressing the key wont work, tap it repeatedly while its booting up.

Reply ↓  Report •

Related Solutions

#4
November 20, 2017 at 05:44:38
@THX 1138 yes i tryed that too, but it didnt work

Reply ↓  Report •

#5
November 20, 2017 at 05:45:27
Maybe i have to update or reset BIOS

Reply ↓  Report •

#6
November 20, 2017 at 07:21:10
If your computer is using UEFI, you can tell Win10 you want to access your firmware settings. It's method two on this page: http://gateway-us.custhelp.com/app/...

How To Ask Questions The Smart Way


Reply ↓  Report •

#7
November 20, 2017 at 08:00:48
Nope its not, just resetted my bios by taking out the battery, but then it gave me two different choices wether i want to load my old bios or set it to default, but i only had 10 secs time for this and when i was trying to navigate to default, my keyboard didnt work

Reply ↓  Report •

#8
November 20, 2017 at 08:53:16
✔ Best Answer
Okay guys, i reset BIOS one more time and managed to set it to default, so i was able to enable virtulization. But still, thanks for your answers :)

Reply ↓  Report •

#9
November 23, 2017 at 01:18:25
Have you tried you spam-click del, or did you just press it once while starting your pc?
also try holding down del while booting if you havnt already

The time gap is very small on most pc's. (for me its about half a second)

i5-6600K@4.776GHz/4.577GHz cache@1.37v | 2x4GB Crucial-DDR4-2133@ 14-14-14-28 1T 2786MHz@1.34v | ASUS Z170-K | Samsung 250GB SSD 850 EVO | MSI Radeon RX 570 ARMOR 4GB@1295cc@1.058v&1900mem


Reply ↓  Report •

Ask Question