How to dm a user here?

May 30, 2019 at 18:46:36
Specs: Win 10, Intel
I want to dm a user called Brorocking, could've answered to his thread vut he lists it as [SOLVED] and hence I cannot. I wanna clarify on his step 8 and 9/ on what he means by memory stick and how he aims to boot pc without the hard drive, ram, and cmos battery.

My issue is that I can't boot up my comouter after a BIOS update to my Intel FH61WW motherboard. Stuck on the intel inside window. Doesn't proceed from here. Can access the F2s and F6s, but that's it. Please help.


See More: How to dm a user here?

Reply ↓  Report •

#1
May 30, 2019 at 21:19:03
A thread marked 'solved' doesn't lock it but eventually after a certain time period (I'm not sure how long) it will be locked. If you can't post to the same thread just start a new one and link to the old thread.

Here's some generic bios recovery info for intel motherboards.

https://www.intel.com/content/www/u...

Maybe it will help.

message edited by DAVEINCAPS


Reply ↓  Report •

#2
May 30, 2019 at 21:58:56
Tried every possible solution to fix my thing up. But okay, I'll make a new post

Reply ↓  Report •

#3
May 30, 2019 at 22:28:42
Oh, you asked about a DM as in 'direct message' I assume. You can send a PM--private message--to the author of that previous thread by clicking on their name in one of their postings and then in the window that opens, click on it again and the PM page will open. As long as they are still a member on this site they will get the message.

message edited by DAVEINCAPS


Reply ↓  Report •

Related Solutions

#4
May 30, 2019 at 23:08:10
"I want to dm a user called Brorocking"
I think you mean PM.
https://www.computing.net/answers/h...

https://s17.directupload.net/images...

https://s17.directupload.net/images...

https://s17.directupload.net/images...

Still best you start your own posts, Brorocking may never come back.

message edited by Johnw


Reply ↓  Report •

#5
May 31, 2019 at 00:29:03
Thanks a lot (man)!

Reply ↓  Report •

#6
May 31, 2019 at 00:33:02
How to mark a thread solved?

Reply ↓  Report •

#7
May 31, 2019 at 10:26:38
"How to mark a thread solved?"

Select "set best answer" on the response that solved the problem.

"Channeling the spirit of jboy..."


Reply ↓  Report •

#8
May 31, 2019 at 12:08:15
It appears your BIOS update was successful. Did you then reset the BIOS setting via the ClearCMOS jumper or by removing the CMOS battery? Be sure to unplug the power cord 1st or the BIOS won't reset. It wouldn't hurt to press & hold the power button in for about 20 seconds after unplugging the power cord but before using the jumper or removing the battery.

Reply ↓  Report •

#9
May 31, 2019 at 20:18:54
I'm trying to do the jumper reset every time, but I'm not seeing any reset window when i boot the computer after that. idk, is my jumper reset not being successful? or like... idk man, tried every possible solution on internet and stuff. lots of forums from back in that day discussed about this "pc won't boot up after intel bios update" and my motherboard DH61WW was one of them everywhere. i just want this to pass, i have a lot of work to do on the computer : (

Reply ↓  Report •

#10
June 1, 2019 at 06:18:46
OK, I'll try to be more clear.

- unplug power cord
- press & hold power button for 20 seconds
- move ClearCMOS jumper from its normal position on the pins to the clear position, wait a second or two, then move the jumper back to its normal position again. Do NOT boot the system with the jumper in the Clear position or you may damage the board.
- re-plug the power cord
- start computer

If that doesn't get you in, try temporarily disconnecting the HDD. It's possible that the BIOS reset changed the HDD settings. If that doesn't allow your system to boot & get you into the BIOS, try the Recovery BIOS explained on these Intel pages:
https://downloadcenter.intel.com/do...
https://www.intel.com/content/www/u...


Reply ↓  Report •

Ask Question