1. ... so you do'nt know were the files you wish to join(?) are?... guessing you wish to "join rather than split" (... no pun)... search on your drive for *.001 or *.002 (files).... Posting is provided "AS IS" with no warrantieshttp://img132.imageshack.us/img132/...Grrrr... ...im

    … so you do’nt know were the files you wish to join(?) are?

    … guessing you wish to “join rather than split” (… no pun)

    search on your drive for *.001 or *.002 (files)

    .

    … Posting is provided “AS IS” with no warranties
    http://img132.imageshack.us/img132/…
    Grrrr… …im

    See less
    • 0
  2. If HP ever had 98 drivers for that model they should still be available for download. The specs for that model indicate there never was 98 support:http://h10010.www1.hp.com/wwpc/sg/e...They had a deskjet 1000cse printer with 98 support which I thought might be the same series. But the 1000cse is a pRead more

    If HP ever had 98 drivers for that model they should still be available for download. The specs for that model indicate there never was 98 support:

    http://h10010.www1.hp.com/wwpc/sg/e…

    They had a deskjet 1000cse printer with 98 support which I thought might be the same series. But the 1000cse is a parallel port printer so I’m sure the drivers aren’t compatible with a USB printer. If you go with an HP printer yoiu’ll need to find something older than the 1000.

    As far as the Canon, if it has driver support for 98 then it has support for 98 SE.

    I doubt the USB 1.0/2.0 is a factor. Any USB drivers for 98 would have to work with usb 1.0 as that was pretty much all that was around back then.

    First make sure you are using the 98 canon drivers. Follow the installation instructions. It can be tricky. Sometimes you need to install them without the device attached.

    See less
    • 0
  3. If HP ever had 98 drivers for that model they should still be available for download. The specs for that model indicate there never was 98 support:http://h10010.www1.hp.com/wwpc/sg/e...They had a deskjet 1000cse printer with 98 support which I thought might be the same series. But the 1000cse is a pRead more

    If HP ever had 98 drivers for that model they should still be available for download. The specs for that model indicate there never was 98 support:

    http://h10010.www1.hp.com/wwpc/sg/e…

    They had a deskjet 1000cse printer with 98 support which I thought might be the same series. But the 1000cse is a parallel port printer so I’m sure the drivers aren’t compatible with a USB printer. If you go with an HP printer yoiu’ll need to find something older than the 1000.

    As far as the Canon, if it has driver support for 98 then it has support for 98 SE.

    I doubt the USB 1.0/2.0 is a factor. Any USB drivers for 98 would have to work with usb 1.0 as that was pretty much all that was around back then.

    First make sure you are using the 98 canon drivers. Follow the installation instructions. It can be tricky. Sometimes you need to install them without the device attached.

    See less
    • 0
  4. If HP ever had 98 drivers for that model they should still be available for download. The specs for that model indicate there never was 98 support:http://h10010.www1.hp.com/wwpc/sg/e...They had a deskjet 1000cse printer with 98 support which I thought might be the same series. But the 1000cse is a pRead more

    If HP ever had 98 drivers for that model they should still be available for download. The specs for that model indicate there never was 98 support:

    http://h10010.www1.hp.com/wwpc/sg/e…

    They had a deskjet 1000cse printer with 98 support which I thought might be the same series. But the 1000cse is a parallel port printer so I’m sure the drivers aren’t compatible with a USB printer. If you go with an HP printer yoiu’ll need to find something older than the 1000.

    As far as the Canon, if it has driver support for 98 then it has support for 98 SE.

    I doubt the USB 1.0/2.0 is a factor. Any USB drivers for 98 would have to work with usb 1.0 as that was pretty much all that was around back then.

    First make sure you are using the 98 canon drivers. Follow the installation instructions. It can be tricky. Sometimes you need to install them without the device attached.

    See less

    • 0
  5. The problem with drivers for older OS's is nothing new, and HP has become exceptionally bad for wiping older drivers off there website. Having USB 1.0 ports would likely have little to do with your problem. Nonetheless, this should work for the HP printer (it appears to be the same file for WinXP-WiRead more

    The problem with drivers for older OS’s is nothing new, and HP has become exceptionally bad for wiping older drivers off there website. Having USB 1.0 ports would likely have little to do with your problem. Nonetheless, this should work for the HP printer (it appears to be the same file for WinXP-Win7):

    http://download.cnet.com/bi1000en-e…

    See less

    • 0
  6. On your 98 cd go to DRIVERS\AUDIO\OPTI. In there are drivers for their 931 and 933 chipsets. If that's what you have then you can install from there.

    On your 98 cd go to DRIVERS\AUDIO\OPTI. In there are drivers for their 931 and 933 chipsets. If that’s what you have then you can install from there. See less
    • 0
  7. Lazesoft Recover My Password Home Editionhttp://www.softpedia.com/get/Securi...http://www.lazesoft.com/forgot-wind...http://www.lazesoft.com/screenshot....http://i.imgur.com/oTphnej.gifTutorialhttp://www.thewindowsclub.com/reset...recALLhttp://www.softpedia.com/get/Securi...http://www.majorgeeks.comRead more

    Lazesoft Recover My Password Home Edition
    http://www.softpedia.com/get/Securi…
    http://www.lazesoft.com/forgot-wind…
    http://www.lazesoft.com/screenshot….
    http://i.imgur.com/oTphnej.gif
    Tutorial
    http://www.thewindowsclub.com/reset…

    recALL
    http://www.softpedia.com/get/Securi…
    http://www.majorgeeks.com/files/det…
    http://www.davescomputertips.com/re…

    Or,

    1: Go into Safe Mode. Then on logon prompt, select Guest to access entry.
    2: Click on Start > Run, Copy & Paste > “control userpasswords2” without quotes & hit > Enter.
    3: Click on the on the user account whose password is forgotten & click on Reset Password.
    4: Enter the new password then click OK to exit. Reboot computer.

    Or,

    Obtain Windows CD (XP, Vista, 7, 8, doesn’t matter process is largely the same)
    Here is a sample using a Vista CD.
    http://www.bleepingcomputer.com/tut…
    1: Set the bios to boot from CD first.
    2: Boot off Windows CD into setup.
    3: At setup hold shift key and press F10.
    4: This will bring up a command window.
    5: In the command window type “control userpasswords2” without quotes & hit Enter.
    6: Highlight admin account and reset and set a new password.

    Or,

    1. Place your Windows CD in your cd-rom and start your computer ( make that the bios set to boot from CD)
    2. Keep your eye on the screen messages for booting to your cd. Typically, it will be “Press any key to boot from cd”
    3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.
    4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
    5. The Licensing Agreement comes next – Press F8 to accept it.
    6. The next screen is the Setup screen which gives you the option to do a Repair.
    It should read something like “If one of the following Windows installations is damaged, Setup can try to repair it”
    Use the up and down arrow keys to select your installation (if you only have one, it should already be selected) and press R to begin the Repair process.
    7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
    8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”
    9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
    10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
    11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
    12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
    13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.

    See less
    • 0
  8. You say the hard drive sounds "as though loading a disk".Do you mean the hard drive makes the normal sounds asit loads the operating system, or do you have a CD drivethat is making the normal sounds at startup when it looksfor a disk? Or maybe you hear both? As Derek said, if you never see anythingRead more

    You say the hard drive sounds “as though loading a disk”.
    Do you mean the hard drive makes the normal sounds as
    it loads the operating system, or do you have a CD drive
    that is making the normal sounds at startup when it looks
    for a disk? Or maybe you hear both?

    As Derek said, if you never see anything on the screen at
    all, then it is a hardware problem. You might be able to
    find a place that will diagnose your problem for free. They
    will then tell you how much they’ll charge to fix it. If you want
    to open the case to find the problem yourself, I’m sure we
    can guide you. Derek already said what to check first.

    — Jeff, in Minneapolis

    See less
    • 0
  9. S.M.A.R.T. is designed to detect upcoming failures in the hard disk drive. While it is possible that the hard disk drive may not fail for several months, it is still inevitable that the hard disk drive will fail. It is ok to continue to use the hard disk drive, however, its recommend that if you areRead more

    S.M.A.R.T. is designed to detect upcoming failures in the hard disk drive. While it is possible that the hard disk drive may not fail for several months, it is still inevitable that the hard disk drive will fail. It is ok to continue to use the hard disk drive, however, its recommend that if you are still under warranty that you consider getting the drive replaced before your warranty runs out.

    you could try the drive in another computer as a slave and run disk check and fix errors, this may fix any errors, but i doubt it.

    can also enable / disable the S.M.A.R.T detection through their CMOS setup. usually pressing delete at startup will get into cmos

    if you can disable smart, and it starts up, do an immediate backup of files and folders.
    if its still under guarantee take it back now!
    if not buy a new drive.

    i hate computers!
    but cant help myself….

    See less
    • 0
  10. http://www.ehow.com/how_7723812_con...Googling is quicker than waiting for an answer....

    http://www.ehow.com/how_7723812_con…

    Googling is quicker than waiting for an answer….

    See less
    • 0