If you can't get it to the desktop, the only other thing I can think of is to put the drive in another--much slower, much less ram--PC and boot it up there. Then install the NDIS patch and anything else that needs to be done with 95 up and running. Then move the drive back to the faster PC. I recommRead more
If you can’t get it to the desktop, the only other thing I can think of is to put the drive in another–much slower, much less ram–PC and boot it up there. Then install the NDIS patch and anything else that needs to be done with 95 up and running. Then move the drive back to the faster PC.
I recommend you copy the msconfig files from 98 and install them so you have that feature.. There is a memory limiting option there too. If you can’t find a download for msconfig I can email the files.
9X isn’t like newer OS’s that give a BSOD if you move a drive to another PC so that should work OK, if you have such a PC available.
If you get all that set right it should boot to normal mode. Even if you get it to the desktop you'll still need 95 drivers for all the hardware and depending on the motherboard they may be hard to find. So you might want to go with a virtual machine as jam suggests, especially if you can't get it gRead more
If you get all that set right it should boot to normal mode.
Even if you get it to the desktop you’ll still need 95 drivers for all the hardware and depending on the motherboard they may be hard to find. So you might want to go with a virtual machine as jam suggests, especially if you can’t get it going on that hardware.
There's a table here:http://support.microsoft.com/kb/181862of entries for MaxPhysPage vs available ram. 30000 allows for 768 meg. You might want to drop that to something like 10000 or 08000 (256 or 128) and see if that works.Also, if you have a config.sys with himem.sys and emm386.exe loading,. tryRead more
of entries for MaxPhysPage vs available ram. 30000 allows for 768 meg. You might want to drop that to something like 10000 or 08000 (256 or 128) and see if that works.
Also, if you have a config.sys with himem.sys and emm386.exe loading,. try temporarily renaming it to something else so it doesn’t load.
You’re not really green until you’re soylent green.
Before you set about restoring the Toshiba to factory settings..., have you safeguarded - as in copied - all your personal files off the system? Typically to DVD but an external hard drive too is nice(r)?The factory reset/restore routine will erase "all your personal files" in the process; which isRead more
Before you set about restoring the Toshiba to factory settings…, have you safeguarded – as in copied – all your personal files off the system? Typically to DVD but an external hard drive too is nice(r)?
The factory reset/restore routine will erase “all your personal files” in the process; which is why I suggest you take steps to preserve them first.
What model Toshiba do you have?
Why the need to go the drastic step of factory reset/restore?
This is an earlier post here at CN; note the suggestion to instigate the reset via Windows itself:
Have you setup the printer to print via wifi - fromthe lenovo?After setting up usb facility, one usually needs to go through a simliar proces for cta-5/etherenet and/ot wifi. It will require the installation of drivers and/or other software for yor printer (to be installed onyour new(?) lenovo.HaveRead more
Have you setup the printer to print via wifi – fromthe lenovo?
After setting up usb facility, one usually needs to go through a simliar proces for cta-5/etherenet and/ot wifi. It will require the installation of drivers and/or other software for yor printer (to be installed onyour new(?) lenovo.
Okay... video card was NOT the problem. I tested the 2nd motherboard and I was getting that error but then I was changing some BIOS settings and eventually everything started working again. I didn't want to change back to my other board so I'm unsure if it the old motherboard works or not. . It wasRead more
Okay… video card was NOT the problem. I tested the 2nd motherboard and I was getting that error but then I was changing some BIOS settings and eventually everything started working again. I didn’t want to change back to my other board so I’m unsure if it the old motherboard works or not.
.
It was that CPU overclock thing that was set to 12x so I just changed it to 6.
Installing Windows 95
If you can't get it to the desktop, the only other thing I can think of is to put the drive in another--much slower, much less ram--PC and boot it up there. Then install the NDIS patch and anything else that needs to be done with 95 up and running. Then move the drive back to the faster PC. I recommRead more
If you can’t get it to the desktop, the only other thing I can think of is to put the drive in another–much slower, much less ram–PC and boot it up there. Then install the NDIS patch and anything else that needs to be done with 95 up and running. Then move the drive back to the faster PC.
I recommend you copy the msconfig files from 98 and install them so you have that feature.. There is a memory limiting option there too. If you can’t find a download for msconfig I can email the files.
9X isn’t like newer OS’s that give a BSOD if you move a drive to another PC so that should work OK, if you have such a PC available.
See lessInstalling Windows 95
If you get all that set right it should boot to normal mode. Even if you get it to the desktop you'll still need 95 drivers for all the hardware and depending on the motherboard they may be hard to find. So you might want to go with a virtual machine as jam suggests, especially if you can't get it gRead more
If you get all that set right it should boot to normal mode.
See lessEven if you get it to the desktop you’ll still need 95 drivers for all the hardware and depending on the motherboard they may be hard to find. So you might want to go with a virtual machine as jam suggests, especially if you can’t get it going on that hardware.
Installing Windows 95
There's a table here:http://support.microsoft.com/kb/181862of entries for MaxPhysPage vs available ram. 30000 allows for 768 meg. You might want to drop that to something like 10000 or 08000 (256 or 128) and see if that works.Also, if you have a config.sys with himem.sys and emm386.exe loading,. tryRead more
http://support.microsoft.com/kb/181862
of entries for MaxPhysPage vs available ram. 30000 allows for 768 meg. You might want to drop that to something like 10000 or 08000 (256 or 128) and see if that works.
Also, if you have a config.sys with himem.sys and emm386.exe loading,. try temporarily renaming it to something else so it doesn’t load.
You’re not really green until you’re soylent green.
Need Help Superglue On Touchpad How To Clean?
remove superglue from plastichttps://www.google.com.au/?gws_rd=s...
https://www.google.com.au/?gws_rd=s…
I Can Not Restore My Toshiba Satelite To Factory Settings.
https://support.toshiba.com/support...message edited by Koldphoe
message edited by Koldphoe
I Can Not Restore My Toshiba Satelite To Factory Settings.
Before you set about restoring the Toshiba to factory settings..., have you safeguarded - as in copied - all your personal files off the system? Typically to DVD but an external hard drive too is nice(r)?The factory reset/restore routine will erase "all your personal files" in the process; which isRead more
The factory reset/restore routine will erase “all your personal files” in the process; which is why I suggest you take steps to preserve them first.
What model Toshiba do you have?
Why the need to go the drastic step of factory reset/restore?
This is an earlier post here at CN; note the suggestion to instigate the reset via Windows itself:
http://www.tomsguide.com/answers/id…
This one may be a better method:
http://www.tomsguide.com/forum/8606…
Did you “ever” make the recovery disk set which Toshiba (and other manufacturers too) advise when you first receive the computer?
How Do I Use @ Sign On My Lenovo Desktop Keyboard?
Ummm, isn't it Shift + 2, just like any other keyboard?
Configure Lenovo Laptop To Print Wirelessly
Have you setup the printer to print via wifi - fromthe lenovo?After setting up usb facility, one usually needs to go through a simliar proces for cta-5/etherenet and/ot wifi. It will require the installation of drivers and/or other software for yor printer (to be installed onyour new(?) lenovo.HaveRead more
After setting up usb facility, one usually needs to go through a simliar proces for cta-5/etherenet and/ot wifi. It will require the installation of drivers and/or other software for yor printer (to be installed onyour new(?) lenovo.
Have done this?
This is the networking setup “how to”:
http://tinyurl.com/cd7yszn
Perhaps have a browse…?
Unable To Install Windows XP/7 Stop Error: 0x0000007F
Okay... video card was NOT the problem. I tested the 2nd motherboard and I was getting that error but then I was changing some BIOS settings and eventually everything started working again. I didn't want to change back to my other board so I'm unsure if it the old motherboard works or not. . It wasRead more
Okay… video card was NOT the problem. I tested the 2nd motherboard and I was getting that error but then I was changing some BIOS settings and eventually everything started working again. I didn’t want to change back to my other board so I’m unsure if it the old motherboard works or not.
.
It was that CPU overclock thing that was set to 12x so I just changed it to 6.
See lessUnable To Install Windows XP/7 Stop Error: 0x0000007F
You may find some information here: http://aumha.org/a/stop.php