unable to connect to 192.168.2.1

January 9, 2011 at 08:24:19
Specs: Windows 7
my dell computer will not let me connect to IP 192.168.2.1 to set up the Belkin wireless router

See More: unable to connect to 192.168.2.1

Report •


#1
January 9, 2011 at 11:06:49
Can you access the internet, or can't you access anything?

Also post the output of ipconfig /all, see this HowTo.
http://www.computing.net/howtos/sho...

Click Here on HowTo ask good Question to get best Help
Let us know, if the problem is solved !!!


Report •

#2
January 9, 2011 at 11:25:48
Yes I can access the internet. How do I find out my computers IP address?

Report •

#3
January 9, 2011 at 11:59:06

Error: unrecognized or incomplete command line.

USAGE:
ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] |
/showclassid6 adapter |
/setclassid6 adapter [classid] ]

where
adapter Connection name
(wildcard characters * and ? allowed, see examples)

Options:
/? Display this help message
/all Display full configuration information.
/release Release the IPv4 address for the specified adapter.
/release6 Release the IPv6 address for the specified adapter.
/renew Renew the IPv4 address for the specified adapter.
/renew6 Renew the IPv6 address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.
/showclassid6 Displays all the IPv6 DHCP class IDs allowed for adapter.
/setclassid6 Modifies the IPv6 DHCP class id.


The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.

For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.

For Setclassid and Setclassid6, if no ClassId is specified, then the ClassId is removed.

Examples:
> ipconfig ... Show information
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Local Area Connection 1" or
"Local Area Connection 2"
> ipconfig /allcompartments ... Show information about all
compartments
> ipconfig /allcompartments /all ... Show detailed information about all
compartments


Report •

Related Solutions

#4
January 9, 2011 at 12:09:27
The correct command is ipconfig /all
Note there is a space before" /all"

Goin' Fishin' (Some day)


Report •


Ask Question