Solved Ubiquiti firewall rules between LAN's

February 28, 2019 at 09:32:11
Specs: Windows 10, Intel core i5 3570K
I'll start the thread looking for someone who knows about configuring Ubiquiti firewall rules between separate LAN's on Ubiquiti. I provided basic details below, can someone out there assist me with what I'm trying to do ?

Can someone reply if they have experience and can point me in the correct direction. I want one LAN 192.168.1.0 / 24 and 192.168.2.0 / 24 . I have those setup but I want to allow hyper-v service from 192.168.1.x to be allowed access from 192.168.2.x


Thank you,


See More: Ubiquiti firewall rules between LANs

Reply ↓  Report •

#1
February 28, 2019 at 23:22:25
✔ Best Answer
I have no Uniquiti devices, but that realy doesn't matter, if you are aware on how to create firewall rules on Uniquiti devices.

On this site, you'll find a describtion, on what ports you need to open for inbound and outbound traffic from and to your Hyper-V Management PC.
https://www.altaro.com/hyper-v/network-ports-related-hyper-v/

Hope that helps!


Reply ↓  Report •

#2
March 1, 2019 at 07:21:02
If you're unfamiliar with using the Hyper-V service then I suggest you read the manual. What you're asking is a simple static route configuration.

I want to allow hyper-v service from 192.168.1.x to be allowed access from 192.168.2.x

I think you mean you want 192.168.2.0/24 to be able to access data in the other subnet.............correct?

Find the routing portion of the Hyper-V management interface and enter your route there. It shouldn't be any harder than that.

If you want traffic to flow both ways, you'll need complementary routes going in both directions:
192.168.1.0/24 --> 192.168.2.0/24
and
192.168.2.0/24 --> 192.168.1.0/24

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Reply ↓  Report •
Related Solutions


Ask Question