three networks 2) 192.168.1.1 and 1) 10.73.8.1

January 12, 2017 at 13:20:51
Specs: Windows 7
I need to communicate between 10.73.8.1 and the 2) 192.168.1.1 networks. I do not need to communicate between the 2) 192.168.1.1 networks
How do I do it?

See More: three networks 2) 192.168.1.1 and 1) 10.73.8.1

Report •

#1
January 12, 2017 at 14:24:55
A little more info is needed. It is not clear what you intend to build. Which router(s) and/or devices are you using?

This may be what you are looking for:

http://www.computing.net/howtos/sho...

I don't need to be right, but I am never wrong.

message edited by stiefler182


Report •

#2
January 12, 2017 at 14:48:00
Just FYI, if you have two networks at 192.168.1.0/24 they are in fact the same network and can already communicate because they are the same network. I'm assuming they're not physically connected at this point in time.

If you connect the two without first ensuring there are no duplicate IP address' between the two, you're going to have a couple small headaches until you straighten the dupe situation out.

As for communication between your class A and class C networks goes, all that requires is a router and routes between the two subnets.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***

message edited by Curt R


Report •

#3
January 20, 2017 at 05:19:19
Neither answer really takes care of what I’m asking except the need more info answer. Is there a way of attaching a document to my question?

Report •

Related Solutions

#4
January 20, 2017 at 07:11:04
If you're having problems with our answers it's because you didn't ask the right question or you don't understand the response.

What kind of document are you hoping to attach? If it's an image or diagram, upload it to any free photo website and then place a link to it in a response. If it's a text document, copy and paste it in a response. Please be sure no matter what you do to never include personal information in a doc or image you post on the internet. Not your email address, your real address or anything like your external IP address.

Other than that, figure out what it is you're wanting to accomplish and then clearly state it.

One thing I can tell you with your original post is, you didn't need to mention the third network at all. Since you don't want it to communicate with the others mentioning it was moot. Your question could have been "How do I make two separate networks communicate with each other?"

Also, you might want to add the subnet mask to each network so we know exactly what we're dealing with. Or better yet, use CIDR notation. (ie: 192.168.1.0/24)

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Report •

Ask Question