speedstream se568 cannot connect to HisenseTV

July 4, 2011 at 03:28:52
Specs: Windows 7, Intel Pentium (R) 3.0 GHz/2 GB
I am trying to add my Hisense LED42T18GP to my home Siemans Gigaset SE568 WAN. The TV has two modes of setting up access to the Network Neighbourhood DHCP IP (AUTO) and Fix IP (Manual) I can't get either to connect and I suspect I have to change something on the Router.
When I select auto setup I get "On: DHCP not ready!" when I set the fixed IP I get "On: Can't get any IP" The TV handbook is no help, there are 3 things to be set 1) IP address but it does not say IP address of what - Router, Desktop computer or TV. 2) Network mask is no problem. 3) default gateway does not specipy if this should be the IP address of the Router, WAN or desktop computer. I have tried every combination of each and always get the same result. The router has Full internet Gateway Device IGD support enabled.

See More: speedstream se568 cannot connect to HisenseTV

Report •

July 4, 2011 at 09:32:11
auto setup I get "On: DHCP not ready!"
The router is not assigning an address to the TV as it should. Connect everything and reboot the router.
To set up fixed IP for TV, you need to know the IP address range in the router and the mask. Pick one that isn't used or can be assigned by the router, but is inside the mask.
Default gateway is the same one as in your computer.

I can't find the manual for this device on the internet to go step by step.
I've had issues with Siemens products. Every problem, I had to shut everything down, restart the router, then the pc's. When it works, it works well.

Report •

July 4, 2011 at 21:58:35
It is really strange, if I make a 10 Base cable lnk between the TV and router then I can see my whole network with no problem. I then remove the cable and am able to continue to browse my WLAN using the dongle in the TV. However once I shut everything down then I am unable to reconnect wirelessly and have to connect with the cable again before using the WLAN.

Report •
Related Solutions

Ask Question