setting up cisco 2800 series router with cme and voip 7960

April 19, 2014 at 14:04:40
Specs: Windows 7 64, I5 Intel/ 6GM
I'm learning about voice and trying to learn things to help me with my CCNA exam. Currently I have a Poe Switch 24 ports, 2800 series router running ios 15 and I have Call manager express. I need some assistance of how I would set this up to make it work for my Cisco VOIP phone 7960 series. I've programmed the basics into the router and switch and seem to be running into a dead end. The phone says configuring IP and getting CME List other than that its not registering even though its pulling an IP.

See More: setting up cisco 2800 series router with cme and voip 7960

Report •

April 20, 2014 at 10:53:47
Ok, how have you setup the router and switch? I'm asking of course about VLAN's. I'm guessing you have at least three:

VLAN 1 = management (default)
VLAN 2 = data

or something like that?

It sounds like you have the basic setup correct but your handset isn't talking to the controller. What VLAN is your controller in and what VLAN is your VoIP handsets in?

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***

message edited by Curt R

Report •

April 20, 2014 at 10:58:59
I'm learning all this stuff so I'm brand new so I don't have vlans setup and I need 3 okay so this is how I have it plugged in

Laptop console cable to sw and router

Wireless connection for internet

2800 series router with cme gigabyte eth 0/0 plugged into switch port 0/5

Voip 7960g only one but will be plugging in 6 plugged directly into switch starting at port 0/10

Report •
Related Solutions

Ask Question