Rete intranet lan + rete internet wifi su 2pc

January 9, 2011 at 03:46:40
Specs: Windows XP
Buongiorno a tutti, devo far girare sui tre pc della mia agenzia le due reti (una lan intranet ed una wireless internet) in contemporanea, più che altro per la condivisione delle stampanti, e chiaramente, se possibile, anche la navigazione su entrambe le reti. Come fare?

Hello everyone, I have three PCs running on my agency the two networks (a lan intranet and a wireless internet) at the same time, more than anything else to share printers, and clearly, if possible, the navigation on both networks. How to do it?


See More: Rete intranet lan + rete internet wifi su 2pc

Report •


#1
January 9, 2011 at 06:00:46
Ciao, anch'io sono italiano, ma quando sei in un Forum di Computing.net sei obbligato a usare l'Inglese, pena la rimozione dell'intervento.

So now let us switch to English.

Your issue is not fully clear to me since a router with wired ports and wireless capability would do the job. A SOHO router with four ports for ethernet wired access and a hot spot like the one I run at my home to connect laptops and desktops in different rooms sharing printers and files.

If however your issue relates to configuration, a more expert guy will support you.


Report •

#2
January 9, 2011 at 09:12:59
That's Ok, it's the first time that I write in a forum like this and I apologize for this mistake.
Let's explain better my matter.
Actually i have a pc on wired intranet and another pc with internet wi-fi.
In the first i have also two different lan printers.
I would like to connect both PCs on internet and intranet also to have the possibility to print with the ethernet printers.
Intranet with CISCO 4 ports and internet with netgear wireless (4 ports wired)
Please contact me for best details. Thank you and sorry for my english.


Report •

#3
January 9, 2011 at 12:50:46
Don't worrie for your English, mine is even worse and here you can see the worst samples of English you never supposed to face (from English mother tongue people too!).

I'm not an expert of networking, usually I am a regular of Programming Forum, and this night I'm very busy, so take a look to the following to see if that can fit your issue

http://www.ehow.com/how_4527815_two...

In the article, following what you posted, the primary would be the wireless router i.e. the one that accesses wan internet. The wired ports should match your requirements. As I said this is just a temptative.

Let me know your opinion.


Report •

Related Solutions

#4
January 10, 2011 at 07:59:52
Don't worrie for your English, mine is even worse and here you can see the worst samples of English you never supposed to face (from English mother tongue people too

LOL

This is because people who learn English (or any other language) as a second language get taught proper grammar and spelling. Sure us "English as a first language" folks do too, but most of us don't pay much attention. That's why we're usually the worst offenders.

I would like to connect both PCs on internet and intranet also to have the possibility to print with the ethernet printers. Intranet with CISCO 4 ports and internet with netgear wireless (4 ports wired)

Since you don't seem to need to have them on separate subnets, the easy solution is to plug the computers and printers into the LAN ports on the router with internet. If you don't have enough LAN ports to do this, you have two choices:

1) Buy a small switch (8 ports) and plug it into a LAN port on the router with the internet connection, and then plug all PC's and printers into the switch.

or

2) you could plug the second router in to the internet router and use the LAN ports on both routers to plug all PC's and printers in (providing that gives you enough LAN ports).

If you wish to try using your router, click on my name above and read my "how-to" guide on "adding a second router". You would want to go with the "LAN port to LAN port" connection scenario. You would need to put the second router on the same LAN subnet as the first router and disable DHCP on it.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Report •

#5
January 10, 2011 at 14:06:52
I sayd that my english is worst... and reading what i had wrote i see that i missed to explain one important thing: there are two differents gateways.

Ethernet wireless
IP 192.168.0.2
subnet 255.255.255.0
gateway 192.168.0.1
server dhcp 192.168.0.1
server dns 192.168.0.1

Ethernet LAN (intranet)
IP 10.28.173.71
subnet 255.255.255.240
gateway 10.28.173.65
server DNS 10.28.173.65
10.28.172.246
DHCP disabled

Thank you.


Report •

#6
January 11, 2011 at 08:22:11
There are two different gateways because there are two different subnets.

As I said before, if it isn't necessary to have two separate subnets, you could combine the two into one subnet then all devices could communicate with each other, and access the internet.

If you do have to have two separate subnets then you would need to use a router between them to allow communication.

My best advice for you at this point would be to talk to someone local to you who knows about this stuff and can explain how to make this happen.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Report •


Ask Question