problem for connecting internet through my acer 1000 labtop

June 19, 2012 at 05:34:00
Specs: Windows XP
acer ferrari 1000 wireless network connection problem

- Labtop could identify the network but can not connect the network through my wireless adapter.
- Driver is up to date
- When I am trying to connect its says " windows is unable to connect the selected network. the network may no longer be in range. please refresh the list of available networks, and try to connect again" For your information range is not a problem.
- The network symbol shows not connected (red cross)
- I can not also connect the internet through direct port connection.
- There is no driver problem in the device manager.

removed email address: google email harvesting before posting your email in a public forum.

edited by moderator: This is a service announcement brought to you for your own protection


See More: problem for connecting internet through my acer 1000 labtop

Report •

#1
June 19, 2012 at 05:39:44
Try resetting the router (disconnect at mains plug then plug it in again).

Report •

#2
June 19, 2012 at 06:34:25
not working

Report •

#3
June 19, 2012 at 07:31:09
You might want to try resetting your TCP/IP stack.

To reset your TCP/IP stack first o pen a command prompt window (ie: Start >> Run >> type cmd and hit Enter) and perform the following command:

netsh int ip reset c:\resetlog.txt

Note If you do not want to specify a directory path for the log file, use the following command:

netsh int ip reset resetlog.txt

Then reboot the computer.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Report •

Related Solutions

#4
June 19, 2012 at 08:44:24
already completed, no result

Report •

#5
June 19, 2012 at 08:48:50
Well, the fact that neither wired, nor wireless, seem to be working makes me think maybe it's your router. Let's try troubleshooting it and see if that gets you back up and working.

Do the following:

Step 1. Recycle the power on your wireless router (ie: unplug it, count to ten slowly, then plug it back in) and see if that doesn't fix the issue.

Step 2. If that doesn't work, check for a newer version of the firmware. If there's a newer one, apply it.

Step 3. If it doesn't fix the issue, the next thing to do is reset the router to factory defaults and then reconfigure it.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Report •

Ask Question