Solved IP conflict Cisco wired & Engenius Wireless

May 3, 2017 at 09:18:14
Specs: Windows 10
Both devices use 192.168.1.1 for the initial configuration. When using 192.168.1.1 the Cisco responds. In checking on the wireless device it states the IP address of the Engenius is 192.168.1.102. I can ping it, but I get errors in trying to open it via a web browser. I need to configure the Engenius EAP1750H. The Cisco router is a Linksys RVS4000. The ping times are way too long.

C:\>ping 192.168.1.102

Pinging 192.168.1.102 with 32 bytes of data:
Reply from 192.168.1.102: bytes=32 time=83ms TTL=64
Reply from 192.168.1.102: bytes=32 time=100ms TTL=64
Reply from 192.168.1.102: bytes=32 time=114ms TTL=64
Reply from 192.168.1.102: bytes=32 time=26ms TTL=64

Ping statistics for 192.168.1.102:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 26ms, Maximum = 114ms, Average = 80ms

C:\>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Dave-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : E0-CB-4E-46-70-F4
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8f0:ff9d:5d2:d892%5(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, May 03, 2017 8:42:45 AM
Lease Expires . . . . . . . . . . : Thursday, May 04, 2017 8:42:45 AM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 249613134
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-9D-74-84-E0-CB-4E-46-70-F4
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{FCBA8811-CA41-4A7D-94B4-50FB4A438FB3}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:953c:1cdf:2e81:b8ac:b2c(Preferred)
Link-local IPv6 Address . . . . . : fe80::1cdf:2e81:b8ac:b2c%6(Preferred)
Default Gateway . . . . . . . . . : ::
DHCPv6 IAID . . . . . . . . . . . : 100663296
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-9D-74-84-E0-CB-4E-46-70-F4
NetBIOS over Tcpip. . . . . . . . : Disabled

message edited by DaBell


See More: IP conflict Cisco wired & Engenius Wireless

Report •

#1
May 7, 2017 at 03:19:16
✔ Best Answer
"In checking on the wireless device it states the IP address of the Engenius is 192.168.1.102"

It's not, the Engenious IP address is http://192.168.1.1 as stated on page 19 of the user manual:

https://www.engeniustech.com/wp-con...



Report •
Related Solutions


Ask Question