I can not get my toshiba to connect to wirele

Netgear Wgr614 wireless broadband router
September 22, 2010 at 22:02:08
Specs: Linux i686
well seeing as I can not get on the internet I will have to be the copier and paster
Microsoft Windows xp (version5.1.2600)
(C) copyright 1985-2001

c\Documents and Settings JAMIE>ipconfig /all

Windows IP Configuration

Host name JEFFERSLAP
Primary Dns Suffix
Node Type .................Unknown
IP Routing Enabled.......no
WNS Proxy enabled..........no

Ethernet adapter Local Area Connection 2

Media State ........................: Media disconnected
Description ...........................: RealtekRTL8102E/RTL8103E Family PCI
-E Fast Ethernet N/C
Physical Address.....................:00-23-5A-FE-45-01

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix...
Description..........................Atheros AR9285 Wireless Network Adapter
Physical Address..........................:00-23-08-A5-58-2F
Dhcp enabled.................................no
IP Address ....................................68.101.113.94
Subnet Mask ................................255.255.248.0
IP Address ...................................fe80::223:8ff.fea5:5821%6
Default Gateway ...........................68.101.112.1
DNS Server .................................fec0.0.0:ffff::1%2
fec0.0.0:ffff::2%2
fec0.0.0:ffff::3%2

Ethernet adapter Local Area Connection 3:

Media State .................................: Media disconnected
Description ..................................: Bluetooth Personal Area Network
Physical Address ........................... : 00-22-58-FC-51-9E

Tunnel Adapter Teredo Tunneling Pseudo-interface:

Connection-specific DNS Suffix .:
Description .................................: Teredo Tunneling Pseudo-Interface
Physical Address .........................: FF-FF-FF-FF-FF-FF-FF-FF
Dhcp Enabled .............................: no
IP Address ................................: fe80::ffff:ffff:fffd%7
Default Gateway ..........................:
NetBIOS overTcpip ......................: Disabled

Tunnel adapter 6to4 Tunneling Pseudo-Interface

Connection-specific DNS Suffix .:
Description................................: 6to4 Tunneling Pseudo-Interface
Physical Address .......................: 44-65-71-5E
Dhcp Enabled ...........................:No
IP Address.................................: 2002:4465:715e::4465:715e
Default Gateway.........................:
DNS Servers .............................: fec0:0:0:ffff::1%2
fec0:0:0:ffff:2%2
fec0:0:0:ffff:3%2
NetBIOS over Tcpip ...................Disabled

Tunnel adapter Automatic Tunneling Pseudo-Interface:

Connection-specific DNS Suffix.:
Description .............................: Automatic Tunneling Pseudo-Interface

Physical Address .....................:44-65-71-5E
Dhcp Enabled ......................: No
IP Address..............................fe80::5efe:68.101.113.94%2
HERE IS THE CONFIG FROM DOS I DONT UNDERSTAND BUT I KNOW SOMETHING IS WRONG WHEN IT SAYS DISCONNETED?????
HELP PLEASE

Default Gateway .....................:
DNS Servers............................:fec0:0:0:ffff::1%2
fec0:0:0:0:ffff::2%2
fec0:0:0:0:ffff::3%2
NetBIOS overTcpip....................: Disabled

C:\Documents and Settings \JAMIE>

had to copy myself and it was fun not but went over it 2 times to make sure
i got it right hope it can help


See More: I can not get my toshiba to connect to wirele

Report •


#1
September 22, 2010 at 23:02:27
What is the type of Internet Connection, you have?

Are you connecting to a wireless router and the router connects you to the internet?

The original poster should always write the last response !!!
Let us know, if the problem is solved !!!


Report •

#2
September 23, 2010 at 00:38:39
I HAVE COX INTERNET MODEM CONNECTED TO MY NETGEAR ROUTER

THE COMPUTER IN THE LIVING ROOM IS WIRED TO IT AND MY LAP IS IN MY ROOM USING THE ROUTER

I ALSO HAVE A TOSHIBA LAPTOP THAT I WANT TO CONNECT BUT IT WONT
I HAVE TRIED ALL THAT I KNOW (WHICH IS NOT MUCH)
ONE THING I SAW WAS THE COMMAND PROMT SHOWS MEDIA NOT CONNECTED VERY CONFUSING



Report •

#3
September 23, 2010 at 09:48:49
So you're trying to connect your Toshiba Laptop to your wireless router.
Have you configured the SSID (refer to the routers manual) and the correct encryption type and key at the Laptop?

You first have to look into the routers wireless settings, to get the correct SSID. encryption type and key.

Then you have to configure the wireless connection to use the correct SSID, encryption type and key.

The original poster should always write the last response !!!
Let us know, if the problem is solved !!!


Report •

Related Solutions

#4
September 23, 2010 at 14:44:04
this is ridicules I CAN NOT DO THIS CRAP!!!
Thanks for trying to help me but I give up this is so "to much"

I can not get the computer to cooperate so forget it trying to set the wireless network connection on the Toshiba is proving to be to hard for me to do and I have been on
this for 5 days now .... i am going to cry pretty soon haahaa so I better stop

i have never been so confused in my life and that has been a long time
anyway Thanks everyone who tried to help me but it is over


Report •

#5
September 23, 2010 at 15:01:29
Ok, it's up to you, to give up on that, but all this things are described in the routers manual.

But, as I said, it's your decision.

The original poster should always write the last response !!!
Let us know, if the problem is solved !!!


Report •

#6
September 23, 2010 at 15:07:46
yes i know but the toshiba is screwed up none of the physical addresses were good
when i tried to add it to the router and I tried all of them listed so you see I have a problem would it matter that i did set the toshiba back to factory settings just a week ago???
that was crazy so if I cant get the toshiba to cooperate then I am at a cross road
i dont know enough to understand what to do

Report •

#7
September 23, 2010 at 15:38:45
It could also be that some of the newer wireless routers have a program you have to copy to a flash drive or cd and run it on the computer to authenticate it on the wireless, its a security measure that some router companies apply to their equipment so you dont have teenagers stealing your internet across the street. That might be the case.

Report •

#8
September 23, 2010 at 15:47:43
What you can do is connect your computer to the router if you havent already, with an ethernet cable. On your laptop the reason your connection is saying media disconnected is because you are going through wireless and not a wire am I correct? Well what you can do is like said connect the computer to the router with an ethernet cable and do the cmd ipconfig/ all and get the gateway or dns ip once you have these numbers go to internet explorer and type the gateway ip into the internet explorer address bar and hit enter, it will ask you for a password the typical username and pasword is username admin password admin but sometimes there is not username and just admin as the password unless you have changed it yourself. Now that you have gotten in to the router programming you are going to want to look for some way of configuring the wireless ip settings. now if the computer thats hard wired into the router is on the internet then get the ip addresses from the ipconfig information you got earlier, dont make the wireless router have the same ip as the computer because it will have problems lol. save those settings and test the laptop again, you may also try to turn off encryption to help connect if your not worried about your neighbors using your internet lol. if that doesnt work then you;ll have to consult with the manufacturer.

Report •


Ask Question