How Do I configure two(2) LAN Cards in 1 PC

February 25, 2011 at 06:15:16
Specs: Windows 7
TO: Everybody
Subjet: 2 LAN Cards in one(1) PC

I have windows 2003 server(192.168.1.100 static ip assign by router - LANCARD1) with 2 lancards on it.. the one connected to router with internet connection(router's gateway ip: 192.168.1.1) but the other one connected to modem(192.168.1.254 - gateway - LANCARD2) which is another private line(VPN) connected to other branch company, another modem there(branch modem IP: 192.168.2.1) if one cable connected to LANCARD2 there's a response when I ping it..but i manually assign IP to LANCard 2(192.168.1.200; subnet: 255.255.255.0; default gateway: 192.168.1.254) which is connected to Modem(192.168.1.254 - gateway)

Poblem: but if when plug-in 2 LANCARDS the lancard1 which is connected to router with internet.. has no signal or time out.. but when i unplug the cable from lancard2(connected to VPN) and there's a signal.. could help me to solve this problem???

OVERVIEW

1 PC - Installed Windows 2003 Server with 2 LANCARDS on it.
LANCARD1 - 192.168.1.100 – connected to ROUTER with internet (static IP assign by router)
LANCARD2 - 192.168.1.200 - connected to MODEM1 without internet which is connected another private line link to another branch and there’s also a MODEM2 there..

ROUTER’s GATEWAY IP: 192.168.1.1 - Office router with internet connection

MODEM1 – 192.168.1.254 Gateway IP -- Office - New Line, connected to another Branch
MODEM2 – 192.168.2.1 Gateway IP ---- Branch - New Line, connected to Office

MODEM1 & MODEM2 are connected each other.. - NEW LINE

LANCARD1 configuration – Static IP assigned by ROUTER IP address: 192.168.1.100
Subnet Mask:
Default Gateway:

LANCARD2 configuration - Manually assign IP: - New installed LAN CARD
IP address: 192.168.1.200
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254

PROBLEM:

When I plug the cable to LANCARD2 then I ping MODEM2 ---- there’s a response..
C:\Users\Rogen d>ping 192.168.2.1 –t

But when I plug the both cable to LANCARD1 and LANCARD2 respectively;
The LANCARD1 has no connection...
C:\Users\Rogen d>ping 192.168.1.1 –t time out

Question: How do I configure both LANCARDS so that they can work properly together
and also i can ping MODEM1, MODEM2, LANCARD1, LANCARD2 & ROUTER?

And how to use ROUTE command, if this is a solution.. ?

And lastly what do we call this type of networking?? is this VPN, EXTRANET, INTRANET? could u explain to me.. ?

Thanks so much for your time and effort...

reallymine@hotmail.com


See More: How Do I configure two(2) LAN Cards in 1 PC

Report •


#1
February 25, 2011 at 07:19:51
There are a couple of problems. Windows isn't the best with multiple NICs & VPNs don't allow split tunneling. A dual WAN router might be the answer.

How do you know when a politician is lying? His mouth is moving.


Report •

#2
February 25, 2011 at 19:47:44
thanks for suggestion.. but what is your recommendation for dual wan router i mean the brand & model.. ??

Report •

#3
February 26, 2011 at 05:43:10
I don't have a brand to recommend. That's your decision.

How do you know when a politician is lying? His mouth is moving.


Report •

Related Solutions


Ask Question