CCNA II test question. Need some help.

November 29, 2009 at 18:40:59
Specs: Windows Vista
In preparation for next month's final, I've been provided an example of how the skills test in my class is going to look like. I was wondering if anyone would be able to help me with some of the parts on the test...

I can provide a scan, or a packet tracer in how the picture looks if need be. (Essentially, if you need it, the picture is: 2 PCs connected to a switch, which is connected to a router WANd over to another router for a mirror image of the other side.

Use as the base net for both LANs
LAN on Router 0 should have 2500 hosts LAN on Router 1 should have 5000 hosts
Use as the base net for the WAN
Use EIGRP 200 as the routing protocol
Set up 4 loopbacks on R0 as follows: L0= L1= L2= L3=
Create one summary route for all loopbacks

Create loopback 0 on router 1 (
Set up a default route to loopback 0 on R1
Propagate that default route through the network

When finished, you should be able to ping every interface on both routers.

Now, if someone could be kind enough to help me through (especially if you can use packettracer, that would be perfect).
Thanks for any help, I can provide any more information that is needed.

See More: CCNA II test question. Need some help.

Report •

November 30, 2009 at 03:14:40
ok i will getting done for you, the summary part i cant do that ok

Report •

November 30, 2009 at 16:32:18
Any help would be absolutely perfect.

Report •

Related Solutions

Ask Question