Solved Can't login to my router admin interface

January 22, 2019 at 01:02:03
Specs: Windows 10

this is my first ever forum post, i'm not the brightest knife in the crayon box, but ill try my best.

So i got a new router recently and my PC won't connect to the admin interface via ethernet, all the other devices is able to, hell even my phone. I tried the "netsh int ip reset resettcpip.txt" command but to no avail.
I have no idea how to proceed.

I don't know if this is relevant but, our previous router had some trouble (only two devices could be connected at a time) and someone I knew changed the IP to

Any help would be appreciated, thank you.

Huawei router
IP/Default getaway:
Subnet mask:

edited by moderator: Removed spam links -Razor2.3

See More: Cant login to my router admin interface

Report •

January 22, 2019 at 01:46:29
✔ Best Answer
if you open cmd.exe and type ipconfig, "Default Gateway" should be the IP of your router.

use that ip in your browser.

perhaps also try:


i5-6600K[delid]@4.7GHz/4.4GHz cache/@1.395v LLC=6 | 2x4GB Crucial-DDR4-2400CL17@14-15-15-28 1T 3000MHz@1.4v | MSI Armor RX 570 4GB@1410Mhz core@1.2v/1920MHz

Report •

January 22, 2019 at 02:16:53
I appreciate the reply, I will follow the method as you say.

Report •

January 22, 2019 at 04:12:37
Sounds as if you are wishing to login to the setup pages...

There are default ip address for all routers, which is what you need to enter in the url box in yur browser.

This link gives you ip addresses specific to huawei routers, and login/password.

There mthod of finding which one yours uses is a bit lengthy but OK

Generally most routers use the admin/admin combination but not all.

The ip address is usually something along the lines of


where x is usually 0 (zero), or 1 or 2 and so on and y similarly.

i.e. or, or, or and so on...

Most common are and in my limited experience; but as I say the range is quite large...

Less common is 192.168.x.254 - where x again is anything from 0 (zero) to whatever number

Many brands use the same ip address as another ans often the same login/password combination. But that's not a problem as all you're doing is "talking to/logging into a router locally; it doesn't go out online

Report •

Related Solutions

January 22, 2019 at 07:20:16
I'm wondering if the problem PC has it's IP address configured incorrectly.

Open a command prompt window and do the ipconfig /all command on the problem PC, and on one that can connect to the router. Please post the output of both here for us to see. Be sure to label "working PC" and "problem PC"

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***

Report •

January 22, 2019 at 13:27:28
The IP address, login ID & password are usually printed on a label attached somewhere on the router. The ID & password should be admin for both. You didn't post the model/model number, but I found this list of IP addresses:

Here's an example of a label:

message edited by riider

Report •

Ask Question