Can't connect to 192.168.1.1 Linksys Router

Windows xp / Home edition 2002
July 19, 2011 at 18:31:33
Specs: Windows XP, Intel Core 2 CPU/ 2.40 GHz/ 2 GB
I'm unable to connect to the router IP in my address bar as stated above and I don't know what to do to find out what the issue is. I've looked in many topics in the tech support but couldn't find a fix. I run my internet on this computer with an ethernet cable plugged into the wall.

See More: Cant connect to 192.168.1.1 Linksys Router

Report •

#1
July 19, 2011 at 18:56:26
You have to plug in the ethernet cable from your pc into the routers lan port. Then you have to plug another lan cable into the routers WAN/DSL port and the other plug into the wall jack.

AND YOU HAVE TO READ THE ROUTERS MANUAL !!!

You are expecting our help, we are expecting your response !!!


Report •

#2
July 19, 2011 at 19:16:25
Not great with the whole router/ internet setup thing, what do you mean by plugging in the ethernet cable from the pc into the router port, because my router is in the basement? Also I asked my parents about any documentation or manuals for the router and they said they didn't know of any that we have.

Report •

#3
July 20, 2011 at 06:27:05
So go to the manufacturers homepage and download the routers manua.

Is there running a cable from the wall plug to the router in the basement?

What ip address does your computer have.
Run CMD and type in ipconfig /all and check the ip address and the default gateway settings.

You are expecting our help, we are expecting your response !!!


Report •

Related Solutions

#4
July 20, 2011 at 15:06:03
There is a cable that runs from the outlet down to the router, and here are my ips:

IP Adress: 192.168.1.115
Default Gateway: 192.168.1.1


Report •

#5
July 20, 2011 at 21:04:58
Make sure the Subnet Mask of network adapter is 255.255.255.0 too, and there is no problem on that network cable. Anyway this is typical wireless setup to configure the wireless router, you might take a look if you want.

Hope this helps.


Report •

#6
July 21, 2011 at 19:23:43
The Subnet Mask is 255.255.255.0, and thanks for the help

Report •

Ask Question