adapter to connect the 2 RJ11's to make an RJ14.

March 29, 2020 at 16:32:21
Specs: Windows 10
I need two adapters to connect the two ( )RJ11's to make an RJ14. to connect my 4 lines to 2 phone inputs 1/2 and 3/4....

See More: adapter to connect the 2 RJ11s to make an RJ14.

Reply ↓  Report •

#1
March 29, 2020 at 16:41:09
This link is to the pinouts for range of rj connectors...

https://allpinouts.org/pinouts/conn...

I doubt there are ready made adapters to do what you want... However using a small junction box as used in phone installation wiring in SoHo environment one can likely make them.

The above table might help in determining how to make them, the connections?


Reply ↓  Report •

#2
March 29, 2020 at 21:13:15
Googled it and found:
https://www.cableandwireshop.com/ph...

You have to be a little bit crazy to keep you from going insane.


Reply ↓  Report •

#3
March 30, 2020 at 00:53:20
Well trawled Fingers...

Does this split an rj14 in to 2 x rj11 out; or is it rj14 in and 2 x rj14 out

or is it rj11 in to 2 x rj14 out; or is it rj11 in and 2 x rj11 out... ?

Their description is a little ambiguous?


Reply ↓  Report •

Related Solutions

#4
March 30, 2020 at 05:08:48
I dun a wee bit research in the bottom of the duck pond and discovered that rj12 and rj14 use the same plug/connector.

The difference lies in how they are wired...; how many conductors are in each...

the rj14 being two cct. wiring and the rj12 being a single cct wiring.

So the adapter found by riider plugs into an rj14 wired socket and gives two single rj12 outputs...

It's wee bit different in the UK system; with which I'm more familiar these days. Although in the past I had a decent awareness of, and familiarity with, the US/Canada systems; going back to the earlier days of non modular installations used today and into the early modular approach.

These are two links I found as useful resources:

http://www.differencebetween.net/te...

http://www.wiki.robotz.com/index.ph...


Reply ↓  Report •

Ask Question