how can i link 2 macs using the d link 524 ro

Outlander May 7, 2010 at 11:28:53

Plug the computers into the router, and configure the router. Simple as that, read your router's owners manual. And any type of networking between any machines will require a basic understanding of TCP/IP and networking. PowerMac 9600(1 ghz G4) 512mb RAM 50gb SCSI ATi 9200 PCI

jecs May 11, 2010 at 16:07:19

It may not be that simple. My D-Link router was Mac capable or friendly but needed to specifically be configured on a PC which I already had and could do the set up with no problems up to today. If this is your case you will need to get your router to a friend PC or use a laptop PC and install there the D-Link software and do the set up there, then bring it back and plug your Macs. Then wait for OSX to auto-configure and connect the Macs to the network. No setup needed for you on the Mac side.