can't boot windows 7 after install linux

September 24, 2011 at 11:11:08
Specs: windows 7, intel i5 / 4 gigs
i can't boot my windows 7 in grub. in grub, got windows 7 (loader). but when i press it, it goes black and then return back to grub. the only i can boot is my linux (mint ver. 11). i dont know what to do. i search many forums and many ppl got their solution, but mine. still can't. i did all the command things such as edit the menu.lst and the grub.config.

here is my boot info script.

Boot Info Script 0.60 from 17 May 2011


============================= Boot Info Summary: ===============================

=> Windows is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

File system: ntfs
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1
and looks at sector 1207314176 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive. No errors found
in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD

sda2: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe

sda3: __________________________________________________________________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________________________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Operating System:
Boot files:

sda6: __________________________________________________________________________

File system: ext2
Boot sector type: Unknown
Boot sector info:
Operating System: Linux Mint 11 Katya
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda7: __________________________________________________________________________

File system: swap
Boot sector type: -
Boot sector info:

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition Boot Start Sector End Sector # of Sectors Id System

/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 357,621,759 357,414,912 7 NTFS / exFAT / HPFS
/dev/sda3 357,625,094 1,250,263,039 892,637,946 f W95 Extended (LBA)
/dev/sda5 357,625,096 830,463,652 472,838,557 7 NTFS / exFAT / HPFS
/dev/sda6 1,224,996,864 1,250,263,039 25,266,176 83 Linux
/dev/sda7 1,217,175,552 1,224,988,671 7,813,120 82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device UUID TYPE LABEL

/dev/sda1 481C3BFD1C3BE51A ntfs System Reserved
/dev/sda2 F41246311245F95E ntfs
/dev/sda5 326E6DBB6E6D790D ntfs Data
/dev/sda6 4c2d2f39-eebe-4f8e-8088-ac7b129c566d ext2
/dev/sda7 71e72d38-a96a-43fa-b163-c01c883d790f swap

================================ Mount points: =================================

Device Mount_Point Type Options

/dev/sda5 /media/Data fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
/dev/sda6 / ext2 (rw,errors=remount-ro)
/dev/sr1 /media/Celcom Broadband iso9660 (ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500)


=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}

insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
insmod png
if background_image /boot/grub/linuxmint.png; then
true
else
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Linux Mint 11, 2.6.38-8-generic (/dev/sda6)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
linux /boot/vmlinuz-2.6.38-8-generic root=/dev/sda6 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Linux Mint 11, 2.6.38-8-generic (/dev/sda6) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=/dev/sda6 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 4c2d2f39-eebe-4f8e-8088-ac7b129c566d
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root 481C3BFD1C3BE51A
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda6 / ext2 errors=remount-ro 0 1
# swap was on /dev/sda7 during installation
UUID=71e72d38-a96a-43fa-b163-c01c883d790f none swap sw 0 0
--------------------------------------------------------------------------------

=================== sda6: Location of files loaded by Grub: ====================

GiB - GB File Fragment(s)

590.477848053 = 634.020761600 boot/grub/core.img 1
590.477863312 = 634.020777984 boot/grub/grub.cfg 1
590.039630890 = 633.550229504 boot/initrd.img-2.6.38-8-generic 6
590.117389679 = 633.633722368 boot/vmlinuz-2.6.38-8-generic 3
590.039630890 = 633.550229504 initrd.img 6
590.117389679 = 633.633722368 vmlinuz 3

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda6

00000000 44 24 08 61 00 00 00 89 74 24 04 89 3c 24 e8 79 |D$.a....t$..<$.y|
00000010 00 ff ff 85 c0 0f 84 bd 00 00 00 e8 60 fb ff ff |............`...|
00000020 8b 55 08 89 7c 24 08 8d bb a9 e0 ff ff c7 44 24 |.U..|$........D$|
00000030 14 00 00 00 00 89 54 24 10 8d 93 d8 db ff ff 89 |......T$........|
00000040 54 24 0c 8d 93 6b e1 ff ff 89 54 24 04 89 04 24 |T$...k....T$...$|
00000050 e8 17 f8 fe ff 89 45 b4 8b 45 e4 89 44 24 04 8b |......E..E..D$..|
00000060 45 dc 89 04 24 e8 12 f7 fe ff 8b 55 b4 89 42 30 |E...$......U..B0|
00000070 8b 45 e0 89 44 24 04 8b 45 d8 89 04 24 e8 fa f6 |.E..D$..E...$...|
00000080 fe ff 8b 55 b4 b9 12 00 00 00 89 42 34 8b 45 10 |...U.......B4.E.|
00000090 89 42 2c 8b 45 d0 89 42 38 8b 45 d4 89 c6 f3 a6 |.B,.E..B8.E.....|
000000a0 75 26 e8 79 7b ff ff 89 44 24 04 8b 45 b4 89 04 |u&.y{...D$..E...|
000000b0 24 e8 36 fe fe ff 81 c4 8c 00 00 00 5b 5e 5f 5d |$.6.........[^_]|
000000c0 c3 8d b4 26 00 00 00 00 89 04 24 e8 7c f3 fe ff |...&......$.|...|
000000d0 8b 55 b4 89 42 3c eb ca 8b 45 c4 89 3c 24 89 44 |.U..B<...E..<$.D|
000000e0 24 08 8b 45 c0 89 44 24 04 e8 2e fd fe ff 89 34 |$..E..D$.......4|
000000f0 24 89 c7 e8 e4 00 ff ff 8b 45 08 89 7c 24 04 c7 |$........E..|$..|
00000100 44 24 08 00 00 00 00 89 04 24 e8 2d f5 fe ff 89 |D$.......$.-....|
00000110 3c 24 e8 d5 f5 fe ff 81 c4 8c 00 00 00 31 c0 5b |<$...........1.[|
00000120 5e 5f 5d c3 90 90 90 90 90 90 90 90 90 90 90 90 |^_].............|
00000130 55 89 e5 5d c3 8d 74 26 00 8d bc 27 00 00 00 00 |U..]..t&...'....|
00000140 55 89 e5 83 ec 38 89 5d f4 e8 6d 42 ff ff 81 c3 |U....8.]..mB....|
00000150 a6 8e 00 00 89 75 f8 8b 75 08 89 7d fc 89 34 24 |.....u..u..}..4$|
00000160 e8 27 03 ff ff 89 34 24 c7 44 24 04 50 00 00 00 |.'....4$.D$.P...|
00000170 89 83 54 06 00 00 e8 f1 f7 fe ff 89 45 e4 e8 9d |..T.........E...|
00000180 7a ff ff 89 34 24 89 44 24 04 e8 dd f7 fe ff 89 |z...4$.D$.......|
00000190 c7 e8 da 82 ff ff 89 34 24 89 44 24 04 e8 ca f7 |.......4$.D$....|
000001a0 fe ff 8b 55 e4 8d 8b ac 75 ff ff 89 4a 18 8d 93 |...U....u...J...|
000001b0 cc 74 ff ff 89 57 54 8d 93 cc 72 ff ff 89 57 58 |.t...WT...r...WX|
000001c0 8d 93 ec 71 ff ff 89 50 5c 8b 5d f4 8b 75 f8 8b |...q...P\.]..u..|
000001d0 7d fc 89 ec 5d c3 8d 76 00 8d bc 27 00 00 00 00 |}...]..v...'....|
000001e0 55 89 e5 53 e8 d2 41 ff ff 81 c3 0b 8e 00 00 83 |U..S..A.........|
000001f0 ec 14 8b 45 10 89 04 24 e8 7f f2 fe ff 83 c4 14 |...E...$........|
00000200


========= Devices which don't seem to have a corresponding hard drive: =========

sdb

=============================== StdErr Messages: ===============================

unlzma: Decoder error

from what i see, my data partition (D) is in partition sda5 but as u guys can see it's output,
Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048.

i don't get what it mean. can help me to solve my problem?


See More: cant boot windows 7 after install linux

Report •

#1
September 24, 2011 at 14:59:59
Boot to W7 dvd and fix boot loader. Then boot to W7 and delete all those linux partitions. Then expand the W7 partition back to recover the space.
Then install a virtual machine then load linux in the virtual machine.

1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.


Report •

#2
September 24, 2011 at 17:33:03
I agree with the above except for the recommendation to use a virtual machine.

I just installed Mint 11 from within Win7 using the built in WUBI installer & it worked great. Just fix your Win7 installation as Jefro said, then boot into Win7 & put the Mint CD in the drive. When the CD menu pops up, select "Install Inside Windows". The rest is easy. Reboot & you'll be greeted by a dual boot menu.

http://php.nudepenguin.net/linuxmin...


Report •

#3
September 24, 2011 at 20:16:06
I never used Mint Linux, but as it uses Grub2, like OpenSuSE Linux, this might help you, to fix your problem.

I have 1 HDD with 1 TB of size.

fdisk -l at the console prompt shows this:

W7P166:~ # fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000e9317

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048      204799      101376    b  W95 FAT32
/dev/sda2   *      206848   104859647    52326400    7  HPFS/NTFS/exFAT
/dev/sda3       104872320  1953520064   924323872+   f  W95 Ext'd (LBA)
/dev/sda5       104872383  1847732039   871429828+   7  HPFS/NTFS/exFAT
/dev/sda6      1847732224  1851940863     2104320   82  Linux swap / Solaris
/dev/sda7      1851942912  1892569087    20313088   83  Linux
/dev/sda8      1892571136  1953519615    30474240   83  Linux

parted /dev/sda shows this:

W7P166:~ # parted /dev/sda p
Model: ATA Hitachi HDS72101 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
 1      1049kB  105MB   104MB   primary   fat32           type=0b
 2      106MB   53.7GB  53.6GB  primary   ntfs            type=07
 3      53.7GB  1000GB  947GB   extended                  lba, type=0f
 5      53.7GB  946GB   892GB   logical   ntfs            type=07
 6      946GB   948GB   2155MB  logical   linux-swap(v1)  type=82
 7      948GB   969GB   20.8GB  logical   ext4            boot, type=83
 8      969GB   1000GB  31.2GB  logical   ext4            type=83

As you can see, there are several partitions on that drive.
<

partition 1 (/dev/sda1) - a MS-DOS partition of 100 MB for imaging with ghost without starting windows
partition 2 (/dev/sda2) - NTFS Windows 7 boot partition of 53,6 GB
partition 3 (/dev/sda3) -extended partition of 947 GB, that has the logical partitions 5 to 8
partition 5 (/dev/sda5) - NTFS data partition for Windows, to store my documents, pictures, videos, music and so on
partition 6 (/dev/sda6) - Linux Swap partition of 2 GB
partition 7 (/dev/sda7) - Linux root partition of 20.8 GB, to boot the Linux system
partition 8 (/dev/sda8) - Linux home partition of 31.2 GB, for users documents and settings on Linux

So my system boots into Grub bootloader, where I can select this:

     Desktop -- openSUSE 11.4 - 2.6.37.6-0.7
     Failsafe -- openSUSE 11.4 - 2.6.37.6-0.7
     Windows 7 Ultimate Edition
     MS-DOS v7.0

And finally here is my /boot/gub/menu.lst, which is used by grub:

cat /boot/grub/menu.lst
# Modified by YaST2. Last modification on Sun Aug  7 20:43:00 CEST 2011
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader

default 0
timeout 8
gfxmenu (hd0,6)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.4 - 2.6.37.6-0.7
    root (hd0,6)
    kernel /boot/vmlinuz-2.6.37.6-0.7-desktop root=/dev/disk/by-id/ata-Hitachi_HDS721010CLA332_JP2921HQ2EAMUA-part7 splash=0 resume=/dev/disk/by-id/ata-Hitachi_HDS721010CLA332_JP2921HQ2EAMUA-part6 splash=silent nomodeset quiet showopts vga=0x317
    initrd /boot/initrd-2.6.37.6-0.7-desktop

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.4 - 2.6.37.6-0.7
    root (hd0,6)
    kernel /boot/vmlinuz-2.6.37.6-0.7-desktop root=/dev/disk/by-id/ata-Hitachi_HDS721010CLA332_JP2921HQ2EAMUA-part7 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x317
    initrd /boot/initrd-2.6.37.6-0.7-desktop

###Don't change this comment - YaST2 identifier: Original name: Windows 7 Ultimate Edition###
title Windows 7 Ultimate Edition
    rootnoverify (hd0,1)
    chainloader +1

###Don't change this comment - YaST2 identifier: Original name: MS-DOS v7.0###
title MS-DOS v7.0
    rootnoverify (hd0,0)
    chainloader +1

This works great for me.
You may have to make some changes, to meet your needs, especially the (hd0,x) things.

You are expecting our help, we are expecting your response !!!


Report •

Related Solutions

#4
September 25, 2011 at 01:32:52
thx for the quick reply, 'fix boot loader', does it mean i have to repair my startup windows? and can u recommend me which virtual machine should i download?

i'm sorry if my question like a newbie, and i am a newbie with all these OS things


Report •

#5
September 25, 2011 at 10:04:32
I try to suggest to newbies that they ought to play with linux in a virtual machine.

I prefer VMware's VMplayer but others love Virtualbox and the list goes on from there.


Try one of those unless you prefer a microsoft solution.

Don't use the limited time server or corporate versions. Just get one of the good free to use ones.

Then install it. It is a software computer. You load to it and boot to it from within Windows. It is really safe and easy.

1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.


Report •

#6
September 26, 2011 at 06:24:40
thx for the suggestion.
do i have any other options to boot my windows without reapiring my start up? this is bcoz i only have a pirate cd of windows. my original cd is at home since i'm studying far far away from my home.

last time i saw someone who edit the grub at the bootloader(the place that choose the OS). i don't know whether it works or not. but if any1 know how it works might show me how? since i coming home on november...

i'm sorry if i act like a greed and rude person.


Report •

#7
September 26, 2011 at 13:45:47
Opps. Can't read Windows 7 I guess.
Sorry, any windows 7 dvd can be used to repair.
Any xp cd can do repairs.

1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.


Report •

#8
September 27, 2011 at 01:29:37
sry to ask about this. but i'm using windows 7... but, if i'm using windows xp's cd, can i repair my start up? bcoz my fren have the original windows xp...

Report •

#9
September 27, 2011 at 12:13:36
can i run my windows 7 using virtual machine in linux? from what i have been searching, there have a way that can run win 7 in linux using virtual machine. but from what i understand,

install linux -> install virtual machine -> install windows 7 on virtual machine

can i run without installing the win 7 again? i want to use my own windows 7 that already installed.


Report •

#10
September 27, 2011 at 16:03:44
It's much better, to get your Win7 partition to boot.
Therefore, start to linux, open a terminal window, type sudo /sbin/fdisk -l and post the result.

You are expecting our help, we are expecting your response !!!


Report •

#11
September 28, 2011 at 01:22:17
owh ok... i'm starting to give to find ways to boot my windows T.T right now, i'm waiting for the correct time to install my windows on virtual machine using linux. but i'm trying to not give so easily

Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x523f3adc

Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 22261 178707456 7 HPFS/NTFS
/dev/sda3 22262 77826 446318973 f W95 Ext'd (LBA)
Partition 3 does not start on physical sector boundary.
/dev/sda5 22262 51694 236419278+ 7 HPFS/NTFS
/dev/sda6 76253 77826 12633088 83 Linux
/dev/sda7 75766 76253 3906560 82 Linux swap / Solaris

Partition table entries are not in disk order


Report •

#12
September 30, 2011 at 12:49:56
No, use the windows 7 install just as it is. Then install a virtual machine and run whatever you want in the VM.

1/3 of highway deaths are caused by drunks. The rest are by people who can't drive any better than a drunk.


Report •

#13
October 3, 2011 at 00:52:15
hello, sorry reply late. i tried many times using start up repair... still cant.. what should i do? errmmm... i post already the result of fdisk.. what i should i do next? anyway, can i do something with my windows boot manager and bootseck in system reserved?

Report •

Ask Question