veiwsonic pro 8200 does not stay on after powering up

March 25, 2015 at 13:07:08
Specs: Windows 7
veiwsonic pro 8200 does not stay on after powering up replaced lamp and reset lamp hr and still shuts down

See More: veiwsonic pro 8200 does not stay on after powering up

Report •

#1
March 25, 2015 at 15:32:25
You presumably mean the whole thing shuts down (not just the lamp)?

Was it playing up before you replaced the lamp?

Provided the lamp is connecting properly and lighting up I don't think there is much you can do from the outside so it might need sending off for repair. Keep watching though in case anyone has a better idea.

Always pop back and let us know the outcome - thanks


Report •

#2
March 25, 2015 at 21:48:28
My ViewSonic goes into standby if no signal is detected.
Do you mean it powers down completely?

Report •

#3
March 26, 2015 at 11:27:32
Yes the whole thing shuts down. It goes on just fine and everything is working with picture and sound and about 45 seconds later it shuts off on its own. ???????

Thanks

Brian

message edited by bigguy8511


Report •

Related Solutions

#4
March 26, 2015 at 11:35:03
everything works find when we power up great picture then it goes blank shuts down.....

Report •

#5
March 26, 2015 at 13:53:49
Presumably the problem was there before you changed the lamp, in which case it is hard to imagine any setting that you can make. Maybe sluc (#2) will have some more ideas as he actually uses one of these.

Always pop back and let us know the outcome - thanks

message edited by Derek


Report •

Ask Question