Solved Trouble with mag lt765s monitor

October 8, 2013 at 05:19:49
Specs: Windows xp
Getting an error msg on screen "no signal". I know it is not the computer or any of the cords. Can you help. Thanks much

See More: Trouble with mag lt765s monitor

Report •


✔ Best Answer
October 8, 2013 at 16:45:23
Tried on another computer. Same problem. Just going to get new monitor


#1
October 8, 2013 at 05:58:25
How do you know it isn't the computer? Normally you take that message at face value. "No signal" means the monitor is not receiving a signal from the computer graphics.

Did this configuration of computer/ monitor work previously? If not, you may have connected to the wrong port.


Report •

#2
October 8, 2013 at 07:27:12
"I know it is not the computer or any of the cords"

Think again. As OtheHill correctly pointed out, "no signal" means no video signal is being sent to the monitor. That means the problem is either with the computer or the cables.


Report •

#3
October 8, 2013 at 09:55:19
If it's not the connections it is most likely the display module or card (hardware). If it is an add-on card it has to be plugged into that socket of-course.

Always pop back and let us know the outcome - thanks


Report •

Related Solutions

#4
October 8, 2013 at 15:13:00
The computer worked previously with the monitor. Had them both tested & was told the monitor was bad. I thought the answer was questionable too, as how could it display the error msg but not the computer info.

Report •

#5
October 8, 2013 at 15:14:53
I was told the video card in the computer was okay. Is there also A card in the monitor?

Report •

#6
October 8, 2013 at 16:34:44
It is just possible that the input connection inside the monitor is faulty (although very unusual). Any chance of borrowing a monitor to try on your computer or trying your monitor on another computer? That would prove the point.

There is no exchangeable card in the monitor. The computer will either have an inbuilt display module or an added on card. The computer make and model number would be useful.

Always pop back and let us know the outcome - thanks


Report •

#7
October 8, 2013 at 16:45:23
✔ Best Answer
Tried on another computer. Same problem. Just going to get new monitor

Report •

#8
October 8, 2013 at 16:50:00
That surprised me - must be something very close to the monitor input socket. Thanks for feedback.

Always pop back and let us know the outcome - thanks


Report •

Ask Question