Stop 0*000000221

November 21, 2011 at 03:07:59
Specs: Windows2000 professional, 2.80 ghz,1GB Ram
Stop 0*000000221
While starting system with win2000 prof. it gives abouve error

See More: Stop 0*000000221

Report •

November 21, 2011 at 04:46:41
sorry i didnt get ur question its a blue screen or wt ........mail me

Report •

November 21, 2011 at 10:47:49
You need to find a copy of the O/S and then copy the file ntdll.dll into the folder

Report •

November 21, 2011 at 11:10:27

It's NOT a good idea to leave your email address in a post anywhere on the web - there are malicious people and malicious programs that are constantly looking for email address to abuse. You should delete it.
You can Edit any of your own posts on this web site, for a limited time, by clicking on the the Edit this message link at the bottom of your own posts.

Report •

Related Solutions

November 21, 2011 at 11:21:13
It can be caused by a corrupted or missing file or by a memory (ram) errors problem.

If it's caused by a corrupted or missing file, the file may be named on the same screen as the error - if it is, tell what the name of the file is.

See response 2 in this - try cleaning the contacts on the ram modules, and making sure the modules are properly seated:

For a laptop, or netbook, you must remove both its main battery and AC adapter before you do that.

For a brand name computer, see the Owner's or User's manual if you need to - how to remove or replace the ram is usually in that - it may already be in your installed programs. If you can't get into Windows, it may be on a disk that came with the computer, or you can go online and look at it or download it - it's in the downloads for your specific model.

For a generic desktop computer, see the mboard manual if you need to - how to remove or replace the ram is usually in that.

0*000000221 - no such STOP error.

It's STOP: 0X00000221
(one less zero)

2.2 Win32 Error Codes

STOP: 0X00000221

Invalid object attributes specified to NtCreatePort or invalid port attributes specified to NtConnectPort.

This Stop message indicates driver, system file, or disk corruption problems (such as a damaged paging file).
This message usually means that a driver or a .dll file has become corrupt

•Perform a Driver Rollback if incase a driver has been updated for a particular component.
•Run any system diagnostics that are supplied by your computer manufacturer, especially a RAM check.
•Perform a System Restore from Safe Mode with command prompt.
•If all Hardware fully functional reinstall Operating System.

Look this error message is generally caused due to page file damage, driver damage, system file damage, disk damage and other damages and corruptions. As a result device driver or system DLL is failed or corrupted i.e. these files acquires different values from the normal values of the checksum values and since you have installed an inappropriate driver for your hardware this error message is flashed. You can solve this problem by performing many tasks like rolling back actions for the updated drivers, restoration of the system from safe mode using command prompt, check for any faults in the hardware especially RAM and run any system diagnostics provides by the vendor, if the hardware is fully functional then reinstall the operating system. After performing the specified actions I am sure that your problems will be solved.

Solution: Turn your PC off, open the case, and take out all hardware cards not required for the setup. Leave your video card (and SCSI card if you have a SCSI hard drive or CD), but remove your modem, sound card, scanner card, network adapter, MPEG decoder, etc. After the OS is installed, shut down the machine, plug in one card at a time, boot into the OS, install the drivers for the card, and configure it. Begin with the sound card (because it consumes a lot of resources) and then add your network card, modem card, and others. If you get this error message again, then the hardware you are installing is probably not compatible with your version of Windows. Check with your hardware vendor or Microsoft’s Hardware Compatibility List.

Report •

Ask Question