Slave/Master pin positioning settings for wd3200aaks

March 14, 2015 at 16:27:52
Specs: Windows XP
What are the pin posioning settings to select between a master or slave drive on the wd3200aaks drives?

See More: Slave/Master pin positioning settings for wd3200aaks

Report •

#1
March 14, 2015 at 16:49:22
go to western digitals website enter model number and it should tell you.

Davidw


Report •

#2
March 14, 2015 at 17:13:40
Googling that model number turns up a SATA HDD. There are no master/slave jumpers.

Report •

#3
March 14, 2015 at 17:40:14
Every drive that i have had, that info is printed on the harddrive.

Report •

Related Solutions

#4
March 14, 2015 at 21:41:27
That is a SATA II drive. There is no Master/Slave settings with SATA drives.

Some SATA II drives had jumper pins to throttle the speed to SATA I. I doubt you would need that now.


Report •

#5
March 14, 2015 at 22:33:32
Yeah, master/slave configuration usually is about two PATA drives on the same cable. I think what you're concerned about is boot priority. That's usually set in cmos/bios setup. Here's some info:

http://www.pcadvisor.co.uk/how-to/p...


Report •

Ask Question