Solved setting bios on my p5k-vm

July 6, 2012 at 05:33:24
Specs: Windows 7, e4500, 2.2/6 gigs
what are the correct settings on my p5k-vm

See More: setting bios on my p5k-vm

Report •


✔ Best Answer
July 6, 2012 at 06:07:57
Do you want to overclock or just run your system at stock speed? Here's the stock settings:

- set AI Overclocking to Manual
- set CPU Ratio Control to Manual
- set Ratio CMOS to 11
- set FSB Frequency to 200
- set PCIe Frequency to 100MHz
- set DRAM Frequency to DDR2-800MHz ***
- set CPU Spread Spectrum to disabled
- set PCIe Spread Spectrum to disabled

*** can't help with the RAM settings because you didn't tell us what you have. Obviously if you don't have DDR2-800, you shouldn't set the RAM frequency to 800MHz. But for your CPU, DDR2-800 is what you should be using ***

http://www.asus.com/Motherboards/In...



#1
July 6, 2012 at 05:36:07
The default settings should be correct.

I am a hardware guy not a software guy but i try to help.


Report •

#2
July 6, 2012 at 05:44:19
The settings for what, there are a lot of settings in the BIOS. If you haven't changed anything like the boot order etc. then the default settings will be good.

Report •

#3
July 6, 2012 at 05:45:59
The default settings is a good starting point(some settings need to be set manual like mem timings, clock and voltage), if your system is working well don't mess with BIOS.

You know the real meaning of peace only if you have been through the war.


Report •

Related Solutions

#4
July 6, 2012 at 06:07:57
✔ Best Answer
Do you want to overclock or just run your system at stock speed? Here's the stock settings:

- set AI Overclocking to Manual
- set CPU Ratio Control to Manual
- set Ratio CMOS to 11
- set FSB Frequency to 200
- set PCIe Frequency to 100MHz
- set DRAM Frequency to DDR2-800MHz ***
- set CPU Spread Spectrum to disabled
- set PCIe Spread Spectrum to disabled

*** can't help with the RAM settings because you didn't tell us what you have. Obviously if you don't have DDR2-800, you shouldn't set the RAM frequency to 800MHz. But for your CPU, DDR2-800 is what you should be using ***

http://www.asus.com/Motherboards/In...


Report •

Ask Question