Solved Repaired Windows 7 Computer goes into sleep mode by itself

August 8, 2012 at 05:45:15
Specs: Windows 7, Pentium d duo 2.66 ghz/ 1 gig
ok so i had the computer out of the repair for 1 month now and yesterday it started to just simply going into sleep mode by itself and then freezing to the point where i can't even shut it down, i was always on the net s i thought it was a problem with flash or chrome so i reinstalled flash and removed chrome but the problem persisted, the odd thing is that when i went int safe mode it work just fine but i can't be in safe mode forever esecially because the sound driver doesn't work in safe mode. so then i tried to lower my resolution this decreased the processor usage drastically from 25% to 3% while i wasn't doing anything . but the problem still ocured then i tought that it could have been because of a virus on the disk so i used AVG to do a complete scan and it didn't find anything and then i uninstalled everything i had installed on the pc but the problem till acures so i don't think it is a software issue . so i went to sleep and then toay as i wanted to start the pc it just automaticly went into sleep mode during the loading screen even when i tried startup repair it still did the same thing. and i really don't think that cuting the power to it is good for a pc but it's the only way to shut it down so i haven't tried to start it up for 6 hours now . please help e if you can

See More: Repaired Windows 7 Computer goes into sleep mode by itself

Report •

✔ Best Answer
August 8, 2012 at 09:03:47
Download linux puppy live disc(about 100MB) burn it and boot from it.
If linux puppy works fine then the OS is to blame.

You know the real meaning of peace only if you have been through the war.



#1
August 8, 2012 at 06:22:35
When you say it goes into sleep mode do you mean windows actually shows the going to sleep mode screen? If you can try to explain exactly what happens. My first hunch is the power supply. But some more information on exactly what happens would be good.

Mattwizz3


Report •

#2
August 8, 2012 at 06:34:01
i guess right now it doesn't work in safe mode right?
I suspect two things
-RAM problem
Reseat the memory & use another slot.
OR
-OS is already screwed.

You know the real meaning of peace only if you have been through the war.


Report •

#3
August 8, 2012 at 07:02:44
first it actually shows the going into seep mode screen and it stays frozen there and second i don't ko+now about the ram i will try to reset them and let you know

edit: i reset the rams and when i started up the pc it stayed still and it was constantly beeping i think there was one constant beep and one or two hat were as if somebody is constantly knocking on wood


Report •

Related Solutions

#4
August 8, 2012 at 07:32:02
You didn't reinstall the RAM correctly.

Report •

#5
August 8, 2012 at 08:43:43
ok i realized that and i set it up correctly but still no response it even did it in safe mode it just simply wont work withour going into sleep mode

Report •

#6
August 8, 2012 at 09:03:47
✔ Best Answer
Download linux puppy live disc(about 100MB) burn it and boot from it.
If linux puppy works fine then the OS is to blame.

You know the real meaning of peace only if you have been through the war.


Report •

#7
August 8, 2012 at 10:03:43
thanks i'll try that if it works i will just reinstall windows 7 or get back to xp

Report •

#8
August 9, 2012 at 07:55:05
it didn't work

Report •

#9
August 9, 2012 at 09:54:12
ignore last message thanks guys i tought i didn't work cause it went to sleep mode when i didn't install it corectly so i gues this prolem is solved

Report •

Ask Question