Overclockear OCZ a 1066 Mhz

Asus / P5 q se plus
October 17, 2011 at 07:04:52
Specs: Windows 7 64 Bits, OCZ Gold Edition
como puedo poner a funcionar mis OCZ Gold a 1066 Mhz como dice su Valor de Fabrica, pues me estan funcionando a 800 Mhz


See More: Overclockear OCZ a 1066 Mhz

Report •

#1
October 17, 2011 at 08:22:20
Please post your question in English. From Google translator:

"I can put to work as my OCZ Gold 1066 Mhz says his factory setting, because I are running at 800 Mhz"

Apparently you have DDR2-1066 but it's running as DDR2-800? What is the FSB speed of your CPU - 800MHz, 1066MHz, or 1333MHz?

http://www.asus.com/Motherboards/In...


Report •

#2
October 17, 2011 at 08:52:58
Most bioses default to rnning 1066mhz ram at 800mhz by default when you first install it, and in that case you have to manually set it to 1066mhz in the bios Setup.

ALL of the ram installed must be able to run at 1066mhz, otherwise it runs at, max, the speed of slowest mhz of all the modules installed.

Older cpu types. e.g. AM2 cpus, cannot use DDR2 1066mhz ram at 1066mhz - the maximum it can run at is 800mhz. .


Report •

#3
October 17, 2011 at 10:27:45
my fsb is at 1333 MHz Q8300 quad core 2.5 MHz
-OCZ Gold Edition RAM 1066 Mhz
-Motherboard P5 Q SE Plus

The memories are working at 800 Mhz and I want to work at 1066 Mhz
Please tell me that I can do about it

Report •

Related Solutions

#4
October 17, 2011 at 10:43:38
yes but my PC is
Motherboard ASUS P5Q SE Plus
CPU Q8300 2.5 MHz to 1333 MHz
OCZ 2x2GB RAM 4 GB 1066 Mhz Gold Edition
64bit Window7
Please have any solution, thanks before hand

Report •

#5
October 17, 2011 at 11:37:12
"my fsb is at 1333 MHz Q8300 quad core 2.5 MHz"

Then you should be running the RAM at 333MHz frequency (667MHz DDR) to match the CPU.


Report •

#6
October 17, 2011 at 12:18:37
then what is the most suitable configuration which suggests to me that my machine has a higher yield

Report •

#7
October 18, 2011 at 17:36:13
"what is the most suitable configuration....."

CPU at 1333MHz FSB, RAM at 667MHz DDR.


Report •

#8
October 19, 2011 at 07:37:55
Most bioses default to running 1066mhz memory at 800mhz by default when you first install it, and in that case you have to manually set it to 1066mhz in the bios Setup.

Google Translate
http://translate.google.com/#

La mayoría de las BIOS por defecto a la ejecución de la memoria 1066 MHz a 800 MHz por defecto cuando se instala por primera vez, y en ese caso usted tiene que manualmente se establece en 1066 en la configuración del BIOS.

ALL of the memory installed must be able to run at 1066mhz, otherwise it runs at, maximum , the speed of slowest mhz of all the memory modules installed.

Toda la memoria instalada debe ser capaz de funcionar en 1066, de lo contrario corre a, como máximo, la velocidad del más lento mhz de todos los módulos de memoria instalados.

Read the motherboard manual - however, none of the manuals are in Spanish.

Lea el manual de la placa - Sin embargo, ninguno de los manuales están en Español.
...

Asus P5Q SE PLUS (home support page) (English)
http://www.asus.com/Motherboards/In...

Downloads - Windows 7 64 bit - 12 listings - 4 motherboard manuals - No Spanish manual listed -
Motherboard Installation Guide (Multiple Languages)

Memory Device Support -
Tested memory list - the only OCZ modules listed are the DDR2 10662G(kit of 2) - part number OCZ2N1066SR2DK

Probado lista de memoria - la única módulos OCZ lista son los 10662G DDR2 (kit de 2) - OCZ2N1066SR2DK Pieza número.

What part number is on your modules ?

¿Qué número está en los módulos?
..............

OCZ support information for memory is poor.
They had a program that told you which module part numbers worked in your motherboard model but it is not there now on their web site and existing links for it do not work.
Even when it did work, it often did NOT list modules for your motherboard model.

Información de soporte para memoria OCZ es pobre.
Tenían un programa que te dije que los números del módulo parte trabajó en el modelo de placa base, pero ahora ya no está en su sitio web y los enlaces existentes para que no funcionan.
Incluso cuando se hizo el trabajo, que a menudo no la lista de módulos para el modelo de placa base.


E.g.
OCZ Ultimate Memory Configurator recommends the right modules for your unique system requirements
http://www.ocztechnology.com/pn/ocz...

That's for 1066 mhz 2 gb
.....

"OCZ Gold Edition RAM 1066 Mhz"

EOL - Memory - Gold Series
http://www.ocztechnology.com/produc...

Only one listing there for PC2-8500 (1066 mhz) memory.
http://www.ocztechnology.com/ocz-dd...

Part Numbers

2GB Module PN - OCZ2G10662G
4GB Kit PN - OCZ2G10664GK

Special Features
2.15V EVP

That's a non-standard ram voltage.
If you have any other ram modules installed, your bios will use the lowest specified ram voltage for all the modules - your 1066 mhz modules may not work properly in that situation.

Esa es una tensión de ram no estándar.
Si tiene alguna módulos de memoria RAM que se instalan, la BIOS se utiliza la tensión más baja ram especificado para todos los módulos - el 1066 mhz módulos pueden no funcionar correctamente en esta situación.
......


P5Q SE Plus CPU support

Intel Core 2 Quad - Q8300 - motherboard's bios version must be 1407 or higher

la versión del BIOS de la placa base debe ser 1407 o superior
http://www.asus.com/Motherboards/In...
http://www.cpu-upgrade.com/mb-ASUS/...

Intel Core 2 Quad Q8300
http://www.cpu-world.com/CPUs/Core_...

Frequency (MHz) 2500
Bus speed (MHz) 1333
Clock multiplier 7.5
.....

Asus Spanish support
http://support.asus.com.tw/download...

Download - Intoducir modelo a busica... - P5Q SE Plus
Search Info


Report •

#9
October 21, 2011 at 12:11:44
Thank you very much for your help from Cuba, if put to work at 1066 Mhz PC will be slower than running at 667 Mhz? , I'll do what I say and see results, then I tell Thanks riider

Report •

#10
October 21, 2011 at 12:54:45
Usually the speed the ram runs at and the speed used for the core of the CPU can be set individually.

The bios will probably set the speed the CPU core runs at to 666.66 (667) mhz automatically

The faster your ram runs at, the faster your system overall. Your CPU may not run any faster but your ram will perform better.

However, the speed the ram runs at must be at least the speed the CPU core requires, 666.66 mhz in this case, and older CPUs may not run when the ram is set to 1066 mhz.
......

Por lo general, la velocidad de la RAM y se ejecuta a la velocidad utilizada por el núcleo de la CPU se puede configurar de forma individual.

El BIOS es probable que ajustar la velocidad del núcleo de la CPU funciona a 666.66 (667) mhz automáticamente

El más rápido de la memoria RAM se ejecuta en el más rápido de su sistema en general.
Su CPU no puede correr más rápido, pero la memoria RAM se obtienen mejores resultados.

Sin embargo, la velocidad de la ram funciona a debe ser al menos la velocidad de la CPU de núcleo requiere, 666.66 mhz en este caso, o más CPUs no se puede ejecutar cuando el pistón está en mhz 1066.


Report •

Ask Question