Solved my pc wont recognize my graphic card

August 27, 2016 at 11:34:26
Specs: Windows 10 64 bit
Hello guys,i have a working gtx 680 nvidia evga card,i use windows 10.1 64 bit os,intel i5-3570k,8gb ram,120gb ssd,and all is working smoothly,i used to put my gtx 680 in my pc,i connected a power supply pins to it as it reqire that,1x8 pin and 1x 6 pin,and connected it to motherboard,i connect my vga cable to graphic and turn pc on,it shows screen but i only have to chose 3 resoulutions,i installed lastest drivers for my gpu from experience and i also tried manuially to download it,but my pc wont recognize it,when i go to right click > Display settings > Advanced display settings > Display addapter , it shows that chip and other things are unavailible and it says 0 dedicated memory , ( http://prntscr.com/cayrqc ) and in device manager under display driver it says Nvidia geforce gtx 680 but a error icon.help me please,i tried older drivers,and the lastest one,i tryed reinstalling it manny times in many slots,and many power cables but still same...

See More: my pc wont recognize my graphic card

Reply ↓  Report •


#1
August 27, 2016 at 13:03:20
✔ Best Answer
Don't try to do too many things at once. You didn't post the make/model of your board or any info about your power supply. It should be a minimum of 550W but must be a reliable brand name unit, not a cheapie.

As for the driver, you should be using the GeForce Game Ready Driver version 372.54 that was released about 2 weeks ago.

http://www.nvidia.com/download/driv...

The resolution options depend on the monitor. It should be set to whatever the native resolution is...1980 x 1080? You didn't state anything about the monitor so that's just a guess. I suggest you uninstall any display drivers you have installed & start over. Make sure to reboot before you try again. If you had been using the i5 integrated graphics prior to the card, make sure to disable them in the BIOS & change the graphics setting to the PCIe card.


Reply ↓  Report •

#2
August 27, 2016 at 15:55:24
i use cooler master v750 750w power supply,i paid it 200$ its new and its fully working,i use 21.5 inch LG montor,i can choose only 3 rexolutions,1280x1024,1024x768,and 800x600,i tried that driver many times,i used to install it via geforce experience and also manualy to download it,it didnt work,my board is a little one 1155,h61m-s2,it worked before on this board but different system and other components was cheaper ( i3 3250 , simple supply 500w, hdd )

Reply ↓  Report •

#3
August 27, 2016 at 20:39:07
You didn't answer my questions about the BIOS. Now that you posted the board model number (most of it anyway), I had a look at the manual. If you haven't done so, go to the Advanced BIOS Features menu, go down to Init Display First & make sure it's set to PCIE x16. Then go to Onboard VGA & make sure it's set to Enable If No Ext PEG.

Reply ↓  Report •

Related Solutions

#4
August 28, 2016 at 13:08:17
its on Peg , i dont know whats problem im so worried

Reply ↓  Report •

#5
August 28, 2016 at 19:59:39
The card obviously works or you wouldn't be getting a display. What I don't understand is why you would have removed the card in the 1st place? And if you can't respond to my questions, I'm just wasting my time.

All I can tell you is that the BIOS settings MUST be correct; the card MUST be fully seated in its slot & the aux power plugs MUST be securely connected; the monitor cable MUST be connected to the card; & you MUST uninstall ALL previous drivers & then reboot before installing the driver I posted a link to in response #1.


Reply ↓  Report •

#6
August 28, 2016 at 21:34:01
i switched board to a same model but new one and system from 7 to 10 , i did all of that

message edited by trollche


Reply ↓  Report •


Ask Question