Solved My computer is not detecting headset on front panel?

Jabra / 50 stereo headband usb-c...
September 26, 2019 at 04:29:02
Specs: Windows 10, 4 GB
Hi,

I am trying to connect my headset with the computer, but PC not detecting. I am using the front panel USB slots and an amazing thing is its working with the rear panel. My headphone model is Jabra Engage 50 Stereo Headband USB
Computer Mother Board Intel


See More: My computer is not detecting headset on front panel?

Reply ↓  Report •

#1
September 26, 2019 at 09:29:53
Did this suddenly stop working or did it work with some previous headphones?

Go to Control Panel > Sounds and look around Properties. All sound systems are different but sometimes there are settings that enable/disable jacks.

Always pop back and let us know the outcome - thanks


Reply ↓  Report •

#2
September 26, 2019 at 21:24:21
✔ Best Answer
The system typically detects audio components by default via the 3.5mm phone jacks. USB audio components probably need drivers to be detected and work. Some USB jacks are not directly connected through the chipset and may behave differently, they may be run through an internal hub or a separate USB controller on the motherboard or even an expansion card. This was typical of many early systems including USB3.0 when it first came out. If you have both USB2 and USB3 front ports, try a USB2 port. USB2 ports will be black on the inside and USB3 ports will be blue inside in these systems.

You have to be a little bit crazy to keep you from going insane.


Reply ↓  Report •

#3
September 29, 2019 at 22:49:31
Thank you Derek for your support.

Reply ↓  Report •

Related Solutions

#4
September 29, 2019 at 22:50:17
Thanks @Fingers for your supportive information and help.

Reply ↓  Report •

Ask Question