Motherboard ms8308EP(266)

Matsinic / Ms8308ep
April 7, 2010 at 03:15:36
Specs: N/A

I have an old matsonic ms8308EP. It's just a motherboard that's not mounted or connected
to anything, yet. I don't even no if it works.

Have someone a hint where I can find a document on pinout for I'f ?

It's likely that I want more info in the future, if the motherbord is possible to "bring alive." So.....................The best is if you have a clue where to find a user guide.

Best regards/Michael

See More: Motherboard ms8308EP(266)

Report •

April 7, 2010 at 03:53:28
Matsonic list a manual for the MS8308D_E at - it should have the same connectors, but at least you'll be able to compare the diagrams to your board.

"I've always been mad, I know I've been mad, like the most of us..."

Report •

April 7, 2010 at 11:07:54
You don't need to install a board in a case to test it. Just lay the board on a non-conductive surface, install a CPU & heatsink/fan, one stick of RAM, PS/2 keyboard, connect a power supply & connect a monitor to the onboard video port. Switch on the monitor & power supply, then momentarily touch the blade of a screwdriver to the 2 pins the case power switch would normally connect to. In the case of your board, the power switch connects to the J4 header, pins 21-22. The fans *should* spin up & the POST screen should display on the monitor. You can then use the keyboard to access the BIOS & reconfigure the settings.

Report •
Related Solutions

Ask Question