Monitor&Cpu wrks fine separately nt together

Viewsonic / Va 17
February 24, 2010 at 00:18:16
Specs: Macintosh
I have a Viewsonic VA 17 series monitor and
M2NEsli mother board ,XFX 8600 GT graphics card.
Monitor won't show the screen it's still in orange sleep
mode! i tried connecting to a other computer it works
fine, to check the VGA port of the card i tried booting
in my friends computer Cpu worked fine with his
monitor! So i changed the VGA cable ,still the same
thing monitor won't change green..!! Monitor and CPU
works separately but not together..!!

See More: Monitor&Cpu wrks fine separately nt together

Report •

#1
February 24, 2010 at 00:33:14
Did u do something or it just happen?

Report •

#2
February 24, 2010 at 00:38:05
we just got shifted to the new house ! other than that nothing !
just assembled everything ! when powered the CPU i happen
find this..! i forgot to mention onething we had some induction
sparks while plugged and powered the UPS from the switch
board..!!

Report •

#3
February 24, 2010 at 00:40:00
I checked with the UPS too..it's fine!..

Report •

Related Solutions

#4
February 24, 2010 at 01:00:01
I don't know if this will work. Try to remove graphic card clean the contacts then install it.

Report •

#5
February 24, 2010 at 01:18:42
Thanks Kuwese but it didn't work..! may be i might have to
check the SMPS..!!

Report •

#6
February 24, 2010 at 01:51:25
If the system works fine in another monitor then psu is fine.

Report •

#7
February 24, 2010 at 01:56:31
I have no clues ..! I'm confused..!

Report •

#8
February 24, 2010 at 01:59:40
When the system plus your monitor connected do u heary any beeps? And your system plus another monitor connected do u hear any beeps?

Report •

#9
February 24, 2010 at 02:08:12
I'm glad that i get quick response .!
Lucky me..! System beeps.! Monitor showed the screen..! but
the image is little bit blurry..!! This is the new VGA cable, i
didn't know it's make,bought it for a cheap price...let me try the
old one once again and let you know..!!

Report •

#10
February 24, 2010 at 02:19:58
It boots flawlessly with new VGA cable.but shows a blurry
image. With the old VGA cable monitor goes to orange sleep
mode but this tim i heared some different beep ,my guess
some component is not fixed properly..! .Let me check all the
possibilities and let you know ..!

Note: There is going to be a power cut in my area for next 2hrs
4pm-6pm,forgive me ! i'll keep u posted !


Report •

#11
February 24, 2010 at 02:26:01
If the system beep (1 or 2 beeps) then the system is working fine when both monitor connected. When other monitor connected do u see clear image or blur image?

edit: and try to clean ram.


Report •

#12
February 24, 2010 at 06:03:39
Make sure you have the latest graphic drivers installed & set the screen resolution to the native resolution supported by the monitor. Anything other than the native resolution (1440x900?) will be slightly fuzzy. And you would probably get a slightly better display using DVI rather than VGA, but both the monitor & video card would have to support it.

Report •

#13
February 24, 2010 at 06:29:34
@kuwese : Sure i'll clean the RAM and try kuwese.My new
cable doesn't work any more...
@ JAM : Monitor is in native resolution.Think i might have buy
a new quality cable and clean all the components & refit them..

Thanks guys.


Report •

#14
February 25, 2010 at 19:17:07
Just Got the components cleaned and reassembled them
again.Used my old VGA cable which came with the
monitor.Things are perfect out of a miracle.It clearly boots in
with a native resolution.
Thank you guys.

Report •

Ask Question