How do i install MAG InnoVision LCD monitor?

Mag innovision Lt765 17
December 11, 2010 at 12:09:28
Specs: Windows XP
I WAS GIVEN A MAG COMPUTER MONITOR BUT THERE IS NO WHERE TO PLUG IT INTO THE WALL AND SO I FIGURED THE CPU WOULD PROVIDE POWER BUT I HOOKED IT UP AND NOTHING HAPPENED. I JUST CANT FIGURE IT OUT.

See More: How do i install MAG InnoVision LCD monitor?

Report •

#1
December 11, 2010 at 12:18:10
First of all do post using all CAPS. It is considered bad etiquette and also seen as SHOUTING.

The monitor should have a power connector. You probably have not looked carefully. Look all around the back and underneath. Also look for a concealed flap which you may have to open to fit the cable into.

If you are sure it has not, then post the make and model plus any other markings on the monitor so that someone can help you.

Also is it a flat screen or CRT?

___________________________________________
When everything else fails, read the instructions.


Report •

#2
December 11, 2010 at 12:18:50
You need a power cord to plug into the wall.

http://www.cablestogo.com/product_l...


Report •

#3
December 11, 2010 at 12:25:56
We've looked everywhere. It has a compartment on the back but there is no where to hook a power cord into it. It is a flat screen.

Product No.: LT765a
Model N.: 780
Power: DC 12V 4.0A
Serial No.: FGVZ45074597U
Manufactured: May, 2004


Report •

Related Solutions

#4
December 11, 2010 at 12:32:35
See the specs here. It says it needs an external PSU.
http://reviews.cnet.com/lcd-monitor...

Probably a tiny jack plug or socket somewhere on the monitor in which you connect an external Power Supply like laptops have.

So do not look for a standard power socket look for a jack plug or similar it may even have a voltage (12 V) marked alongside it.


___________________________________________
When everything else fails, read the instructions.


Report •

#5
December 11, 2010 at 12:42:14
I rechecked that compartment on the back but it is so compact I cant really see in there. I haven't found any other plug-ins anywhere else on it.

Report •

#6
December 11, 2010 at 12:50:15
Long shot - Look underneath the stand.

It has to be there somewhere. You can see the specifications which says it needs an external PSU.

___________________________________________
When everything else fails, read the instructions.


Report •

#7
December 20, 2010 at 11:02:59
Have exactly the same problem! I'm pretty technically inclined and have looked all over this stupid thing. 3" to the left of the serial cable there is an empty hole. Is that where it should be? No jack there.

Report •

#8
January 10, 2011 at 02:05:58
Someone brought me this screen
And I allso beeing looking for the plug-in and did not find it
I GOOGLE it and found this post
I kept looking and Finally found it at the end of the vga cable
Near the screws you will see a hole for the power jack
they use the same cable for the power and the data
I've never seen such a thing

Report •

Ask Question