Hard Disk Boot Failure

March 3, 2014 at 08:41:47
Specs: Windows 7
I happen to disable the Hard Disk boot priority of the Asus Windows 7 Ready!. On starting after disable Nothing display on the screen. Please help how to go back the BIOS Screen.

See More: Hard Disk Boot Failure

Report •


#1
March 3, 2014 at 10:07:57
Watch the screen at startup, there's usually a brief message such as "press F2 to enter setup" or something similar. The key differs by manufacturer, some of the common ones are Del, F1, F2, F10, Esc, or Tab. Here's 2 examples:

http://winliveviews.files.wordpress...

http://www.buildeasypc.com/wp-conte...


Report •

#2
March 4, 2014 at 16:21:41
What you did should not have prevented you going back to BIOS and undoing it.

What were you trying to fix in there - it might have some bearing on what has happened?

Always pop back and let us know the outcome - thanks

message edited by Derek


Report •

#3
March 4, 2014 at 22:27:10
On stating the computer, "No Signal" is displayed on the screen. But Everything seems to work well since the computer did starts. Tried to change with the Know Good RAM that also does not work. This happen after being disable the Hard Disk boot priority. Please help provide me the solution to the problem,
You will be highly appreciated!

message edited by Niphri82


Report •

Related Solutions

#4
March 5, 2014 at 03:20:49
sounds like a video card that went out or a bad video cable replug your connections on computer and monitors this should fix the problem if cable isnt making good connection keep us posted so we can give you more help if neeeded

Davidw

message edited by Davidw


Report •

#5
March 5, 2014 at 11:58:41
You can't "disable" boot priority. You either disabled the hard disk or you changed boot priority. If you changed boot priority it would still boot to Windows eventually unless you have disk or flash drive inserted.

Let us know the make and model number of the computer.

Always pop back and let us know the outcome - thanks


Report •


Ask Question