Solved every time I reboot or restart get BlueScreen (v5305wn )

January 13, 2014 at 04:08:37
Specs: Windows 7
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 1033

Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 8F42B774
BCP3: 807C2A94
BCP4: 807C2670
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:

See More: every time I reboot or restart get BlueScreen (v5305wn )

Report •

January 13, 2014 at 05:00:52
Please post the info from the blue screen.

Report •

January 13, 2014 at 15:47:02
Dump File : 011314-22078-01.dmp
Crash Time : 1/13/2014 6:09:26 PM
Bug Check Code : 0x1000007e
Parameter 1 : 0xc0000005
Parameter 2 : 0x8e631774
Parameter 3 : 0x97b57a94
Parameter 4 : 0x97b57670
Caused By Driver : bcmwl6.sys
Caused By Address : bcmwl6.sys+13774
File Description : Broadcom 802.11 Network Adapter wireless driver
Product Name : Broadcom 802.11 Network Adapter wireless driver
Company : Broadcom Corporation
File Version :
Processor : 32-bit
Crash Address : bcmwl6.sys+13774
Stack Address 1 : bcmwl6.sys+137da
Stack Address 2 : bcmwl6.sys+178fe
Stack Address 3 : bcmwl6.sys+1d773
Computer Name :
Full Path : C:\Windows\Minidump\011314-22078-01.dmp
Processors Count : 1
Major Version : 15
Minor Version : 7601
Dump File Size : 143,136
Dump File Time : 1/13/2014 6:09:45 PM

Report •

January 13, 2014 at 17:37:21
✔ Best Answer
Mmm - make and model computer would very useful to know...

Often Blue Screen Of Death (BSOD) can be due to memory problems - amongst other possibles...

If you know how to access the RAM modules, then perhaps try removing them all. Clean the contacts on each with soft eraser (as used for pencils). Replace one of the modules (if more than present), restore power to the system and reboot. If it doesn't improve the situation (allows the system to boot OK) then remove that module and repeat test with the other modules in turn - one module at a time.

NOTE... Remove mains power completely, and if a laptop remove the battery as well - when removing or re-installing memory modules... Only replace battery and/or restore mains power when you finished re-installing a RAM module.

If the problem clears with one module and not another... logically the module/s that is/are producing the bsod is/are defective, and should be replaced. Those that do not produce bsod are (logically) OK?

Report •

Related Solutions

January 14, 2014 at 18:37:10
I try and waited a while and give it a second try but every single time restarted same as before . this is a Compaq Presario V5305WM I had other extra modules and try them with same results. Also forgot to describe ta went shout down just reboot and go back to windows. I thank for your time

Report •

January 15, 2014 at 05:20:55
A problem has been detected and Windows has been shut down to prevent damage
to your computer.

The problem seems to be caused by the following file: bcmwl6.sys


If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.

If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Technical Information:

*** STOP: 0x1000007e (0xc0000005, 0x81e18774, 0x98f4ba94, 0x98f4b670)

*** bcmwl6.sys - Address 0x81e18774 base at 0x81e05000 DateStamp 0x4ea8c599

sorry Rider I just finally how to open bluescreen files hope give everyone a better wiew

message edited by Santiagojr123

Report •

January 15, 2014 at 19:21:19
after posting the file for the blue screen problem that I been having decided to uninstall my wireless driver and reinstalled and so far the blue screen had not happen .Thank to all of you that took time to help

Report •

January 16, 2014 at 02:03:01
Thank you for posting back with - we hope - a solution...

Report •

January 16, 2014 at 11:19:58
No thank you for your time and dedication so far so good I'm sure I be back with other ?. Glad to have a place like this ready to help

Report •

Ask Question