Solved ecs mcp61pm-am manual

April 7, 2010 at 12:24:00
Specs: Windows XP
trying to find motherboard manual for Ecs Mcp61pm-Am

See More: ecs mcp61pm-am manual

Report •

✔ Best Answer
April 9, 2010 at 07:18:37
In that case, you use the Aspire e380 model when you search for appropriate ram that will work for sure.


#1
April 7, 2010 at 13:10:39
It's an OEM board made by ECS but used by Gateway, Packard Bell, possibly others. You're not going to find the exact manual at the ECS website, but you *may* be able to find something close to it. I doubt it would be of much help though. What is it that you need to know about your board?

Report •

#2
April 7, 2010 at 16:05:02
Sometimes emachines desktop systems have the same OEM only mboards as other brands, so I took a look on a third party emachines info web site.

Unofficial info, no manual:
http://www.e4allupgraders.info/dir1...

DO NOT use an emachines bios update if your system is not an emachines system !!
The e4allupgraders site is NOT presently allowing downloads, anyway.

Packard Bell has info, no manual:
http://support.packardbell.com/uk/i...

http://support.packardbell.com/uk/i...

DO NOT use a Packard Bell bios update if your system is not a Packard Bell system !!

Motherboard connectors (no pinouts of headers):
http://support.packardbell.com/uk/i...
.......

The e4allupgraders site has no manual, but it has listings for manuals for mboards in the same ECS series.
The e4allupgraders site is NOT presently allowing downloads, so I looked on the web using the name of three mboard manual downloads in the same ECS series.

I found one of them - if you need info about the pinouts of headers on the mboard, or info about bios Setup settings, the info in this manual is probably the same or very similar as for your mboard:
http://www.ecsusa.com/DLfile/manual...

If you need info about which specific ram works in the mboard, search a ram manufacturer's or ram distributor's web site by using the model of the brand name system the mboard was in to search with, to find the correct ram. E.g. use the Ram Configurator or similar.

If you don't know which brand name model it was in
- look on the Packard Bell web site to find out which Packard Bell models it was in,
- or - see the mboard info on the e4allupgraders site for the list on the left of the emachines models it was in.


Report •

#3
April 9, 2010 at 04:45:33
actually it's an acer aspire e380 mb. but they don't have the manual just the drivers

Report •

Related Solutions

#4
April 9, 2010 at 07:18:37
✔ Best Answer
In that case, you use the Aspire e380 model when you search for appropriate ram that will work for sure.

Report •

Ask Question